No products in the cart.
Shop
Showing 145–192 of 495 results
- Appearance Testing, Color, Colorimeter
X-rite RM200QC Spectrocolorimeter – VF0620
Colorimeters with precision. The X-Rite RM200QC Imaging Spectrocolorimeter bridges the gap between color appearance and material color — from incoming material batches to outgoing product shipments — in an elegant, portable unit that fits comfortably in your hand.
SKU: VF0620 - Climate Testing
EXTECH CFM/CMM Mini Thermo-Anemometer
The AN100 CFM/CMM Thermo-Anemometer can simultaneously display Air Flow or Air Velocity plus Ambient Temperature. Easy to set area dimensions (ft² or m²) are stored in the meter’s internal memory for the next power on. Additional features include: 20 point average for Air Flow and 3% velocity accuracy via low friction 2.83 in. D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable. Comes complete with 9V battery, protective rubber holster and case.
SKU: EX-AN100 - Climate Testing, Temperature and Climatic Testing
TQC SHEEN Thermo-hygrometer – RV2100
The TQC Thermo hygrometer is a simple hand-held digital thermo/hygrometer. Temperature and air humidity are displayed simultaneously. Equipped with MIN/MAX memory, °C/°F selection, HOLD function and dewpoint indication.
The TQC Thermo hygrometer operates 10.000(!) hours on 3 batteries type AAA and switches itself off after 10 min.
ATTENTION HUMIDITY SENSOR The Humidity Sensors housed in these products are susceptible to contamination from pollutants such as solvents and exposure to saturated air and therefore are not covered under the 2 year warranty. Furthermore it is expected that the sensor’s readings will drift by up to 0.5% per year.
SKU: RV2100 - Pit Gages
Analog Dial Indicators N88-I
Western Instruments Dial Pit Gauges, such as a Basic Pit Gauge, can actually be 3 different Models. Our 3 different Dial Indicators are interchangeable, and fit the same Blade, therefore, we can offer;
▪ Imperial Basic Pit Gauge (N88-2) or
▪ Metric Basic Pit Gauge (N88-2-M) orSKU: n/a - Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
NON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness TestingNON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.SKU: STDSHIMS - Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
DeFelsko Certified Plastic Shims
Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness TestingDeFelsko Certified Plastic Shims
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Each shim is packaged in a protective sleeve
- Certificate of Calibration showing traceability to PTB is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
SKU: n/a - PosiTector 6000 Accessories, Surface Characteristics, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories
Testex Digital Micrometer Kit
PosiTector 6000 Accessories, Surface Characteristics, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage AccessoriesTestex Digital Micrometer Kit
Testex Digital Micrometer Thickness Gage Kit includes everything required to measure the surface profile using replica tape. Includes digital micrometer, three cartons of replica tape.
SKU: RTKIT - Smoothness Testing, Surface Characteristics, Surface Profile
Testex Digital Micrometer
The Testex Digital Micrometer makes using Testex Replica Tape even easier. It is custom-deigned to be the optimal tool for measuring replica tape, and makes taking measurements and creating reports easier than ever.
SKU: RTM - Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories
High Accuracy Burnishing Tool
Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage AccessoriesHigh Accuracy Burnishing Tool
Burnishing tool includes a built-in spring mechanism ensuring that consistent force is used, regardless of how hard the tool is pressed against the surface
SKU: RTBURNISHHA - ASTM D1200, Viscosity
VISCOSITY CUP ASTM D1200 FORD
The TQC Viscosity Cup ASTM D1200 Ford is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity). the viscosity cups are suitable for laboratory use with a stand. Widly used for measuring paint, lacquers and other liquids.
SKU: n/a - DIN 53211, Viscosity
VISCOSITY CUP DIN 53211
The TQC Viscosity Cup DIN 53211 consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precize, with fixed stainless steel nozzle.
The TQC Viscosity Cup DIN 53211 is available in titanium anodized aluminum or stainless steel (SS303). Each viscosity cup comes with a hard plastic storage case, with protective soft material on the inside.
SKU: n/a - Accessory Products, DIN 53211, Viscosity Accessories
Interchangeable Nozzle options 2 mm to 8mm for Viscosity Cup Din 53211
Accessory Products, DIN 53211, Viscosity AccessoriesInterchangeable Nozzle options 2 mm to 8mm for Viscosity Cup Din 53211
Nozzles for Viscosity Cup DIN 53211 SKU: VF2020
Viscosity Cup DIN 53211 with Interchangeable Nozzle consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precise, with fixed stainless steel nozzle.
SKU: n/a - ASTM D1200, Viscosity
Viscosity Cup ASTM D1200 Immersion Ford – VF2087
The TQC Viscosity Cup Immersion Ford is a range of titanium anodized aluminum or stainless steel (SS303) viscosity cups with stainless steel inner cavity fixed nozzle and handle. Ideal for measuring coatings and other fluids during application or production.
SKU: n/a - ISO 2431, Viscosity, ГОСТ 8420
Viscosity Cup DIN 53211 Immersion
The Sheen Viscosity Cup DIN 53211 Immersion is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel (SS303) nozzle (inner cavity) and handle. Inner dimensions similar to DIN 53211. Ideal for measuring coatings and other fluids during application or production.
The dimensions of this flow cup are according to DIN 53211, fitted with a handle, and also referred to as a FRIKMAR cup.
SKU: n/a - Viscosity
TQC SHEEN Lory Cup – VF2199
The Sheen Lory Cup is designed for quick measurements on location or during production processes. The bottom of this cup is provided with a small hole and needle point. The product measured will flow out of the small hole and as soon as the needle point appears during this process, the flow time is determined.
SKU: VF2199 - Pit Gages
Basic Pit Gauge – N88-02
Basic | N88-2 | Center Mount 2.5″(64mm) Blade, our most popular Gauge
Assuring compliance with Corrosion Allowances for equipment wherever Corrosion affects materials, such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole Assemblies, Bridges and Structures, Shipping, Concrete, and Aircraft Components. Due to there versatility, many of our Pit Gauges have other uses, such as wear measurement, Weld Alignment, Structural Fit-up, etc. Western Instruments Dial Pit Gauges allow the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. Various types are available for different applications, including the Tri-Gauge for basic evaluation and the Bridging Pit Gauge for evaluating large areas of weight loss corrosion. The right gauge for the right application.
SKU: n/a - kV Meter
Nordson Non-Loading kV Meter Kit
The Nordson Non-Loading kV Meter Kit kV meter precisely measures actual output voltage in liquid and powder coating operations and is available at Great Lakes Gages. It is used to troubleshoot electrostatic spray systems. The flexible cable attachment measures voltage inside high-voltage power supply for powder and liquid coating application systems.
SKU: 185807 - Pit Gages
Basic Plus Pit Gauge- 3.5″ Bla – N88-03
TriGauge: Western’s patented Lever Type Pit Gauge with Metric and Imperial Scales. Inquire at your supplier for information,
Assuring compliance with Corrosion Allowances for equipment wherever Corrosion affects materials, such as Pipeline, Vessels, Piping, Storage Tanks, Oil Country Tubular Goods, Drill Pipe, Bottom Hole Assemblies, Bridges and Structures, Shipping, Concrete, and Aircraft Components. Due to there versatility, many of our Pit Gauges have other uses, such as wear measurement, Weld Alignment, Structural Fit-up, etc. Western Instruments Dial Pit Gauges allow the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. Various types are available for different applications, including the Tri-Gauge for basic evaluation and the Bridging Pit Gauge for evaluating large areas of weight loss corrosion. The right gauge for the right application.
SKU: n/a - Elasticity Testing, Hardness Tester, Impact Testers, Resistance & Deformation
Impact Tester SP1880, SP1890, SP1891, SP1895, and SP1896
Elasticity Testing, Hardness Tester, Impact Testers, Resistance & DeformationImpact Tester SP1880, SP1890, SP1891, SP1895, and SP1896
The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14
Mandatory test in Qualicoat, QIB and GSB accredited laboratories.
SKU: n/a - ASTM D522, Elasticity Testing, ISO 6860, Resistance & Deformation
Bend Test Conical Mandrel Basic – SP1831
ASTM D522, Elasticity Testing, ISO 6860, Resistance & DeformationBend Test Conical Mandrel Basic – SP1831
The TQC Conical Bend Test “Basic” is a simplified version of the TQC Conical Bend Test “Pro” (SP1830) It is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or detachment from a metal test panel in accordance with ISO 6860 and ASTM D522. The conical shape of the bending area allows the deformation of the test panel and examination of the elasticity range of a coating over any diameter between 3.1 and 38 mm in one single test. The sample panel is secured by means of two clamping knobs which has to be tightened and untightened by turning respectively clockwise or anti-clockwise.
SKU: SP1831 - ASTM D522, Elasticity Testing, ISO 6860, Resistance & Deformation
Bend Test Conical Mandrel Pro – SP1830
ASTM D522, Elasticity Testing, ISO 6860, Resistance & DeformationBend Test Conical Mandrel Pro – SP1830
The TQC Bend Test Conical Mandrel “Pro” is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating-, paint or varnish to cracking, elongation and/or detachment from a metal test panel in accordance with ISO 6860 and ASTM D522. The conical shape of the bending area allows the deformation of the test panel and examination of the elasticity range of a coating over any diameter between 3.1 and 38 mm in one single test. The sample panel is secured to the apparatus by means of a quick lever handle that lock and unlocks the panel in a split second using just hand.
SKU: SP1830 - Elasticity Testing, Resistance & Deformation
TQC Sheen Set of 14 Mandrels for CYL Bend Test 100MM – SP1835
Elasticity Testing, Resistance & DeformationTQC Sheen Set of 14 Mandrels for CYL Bend Test 100MM – SP1835
TQC set of 14 Mandrels, width 100mm, for TQC Bend Test 100 mm.A set of 14 mandrels with a diameter of 2, 3, 4, 5, 6, 8, 10, 12, 13, 16, 19, 20, 25 and 32 mm. Includes Desktop holder (can also be wallmounted).
SKU: SP1835 - Film Application
8-sided Film Applicator – Octoplex – VF1550
8-Sided film applicator 25,50,75,100,125,150,175 and 200µm
Sheen Instruments equivalent product code: SH1114Multifunctional film applicator (Octoplex) with 8 pre-defined thickness sides for
applying paint-films of: 25, 50, 75, 100, 125, 150, 175, 200 micron. Film width 60 mm.SKU: VF1550 - Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a
