No products in the cart.
NF T030-014, Viscosity
Sheen AFNOR Viscosity Cups – VF2195, VF2196, VF2197, VF2198
The Sheen AFNOR Viscosity Cups are a range of titanium anodized aluminum viscosity cups.
The Sheen AFNOR Viscosity Cups are a range of titanium anodized aluminum viscosity cups.
Documents
Datasheet – viscosity-cups-afnor-vf2195-d44-1-141.pdf
Sheen AFNOR Viscosity Cups Description
Sheen AFNOR Viscosity Cups – VF2195, VF2196, VF2197, VF2198
VF2195 – TQC SHEEN Afnor 2.5 Viscosity flow cup
VF2196 – TQC SHEEN Afnor 4 Viscosity flow cup
VF2197 – TQC SHEEN Afnor 6 Viscosity flow cup
VF2198 – TQC SHEEN Afnor 8 Viscosity flow cup
$345.00 for 3 item(s)
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Model | VF2195 – TQC SHEEN Afnor 2.5 Viscosity flow cup, VF2196 – TQC SHEEN Afnor 4 Viscosity flow cup, VF2197 – TQC SHEEN Afnor 6 Viscosity flow cup, VF2198 – TQC SHEEN Afnor 8 Viscosity flow cup |
Related products
- Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000 - Viscosity
TQC SHEEN Lory Cup – VF2199
The Sheen Lory Cup is designed for quick measurements on location or during production processes. The bottom of this cup is provided with a small hole and needle point. The product measured will flow out of the small hole and as soon as the needle point appears during this process, the flow time is determined.
SKU: VF2199 - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695
