No products in the cart.
TQC Sheen Products are coating inspection and paint inspection testing equipment and tools manufactured to measure specific paint and coating qualities.
TQC Sheen
Showing 1–48 of 429 results
- Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000
Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
The Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT.
See Datasheet for Basic and Full kit comparisons
SKU: n/a - Amine Blush Kit, Inks and Coatings, PH / Conductivity
Amine Blush Kit – SP7500
The TQC Amine Blush Kit is a multi step amine blush indicator. Due to advanced research on suitable media the TQC Amine Blush Kit is the most advanced kit on the marked. Based on a double color change the indicator is the first to implement this multi step color change.
SKU: SP7500 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (cutting wheel not included) VF1856
The Cross Cut Adhesion Test Kit CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
SKU: VF1856 - Adhesion, ASTM D3359, ISO 2409, Materials Testing, Scratch Testing, ГОСТ 15140
CC2000 Cross Cut Adhesion Test Kit (excluding knife) SP1666
Adhesion, ASTM D3359, ISO 2409, Materials Testing, Scratch Testing, ГОСТ 15140CC2000 Cross Cut Adhesion Test Kit (excluding knife) SP1666
The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
Frequently used and standardized instrument to test the adhesion of dry coatings on their substrate.
SKU: SP1666 - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Adhesion, Adhesion (Wood), Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000 - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Adhesion, BS EN ISO8502-2, Surface Cleanliness/Preperations
TQC Dust Test Kit – SP3200
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3200 - Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250 - Adhesion, Elasticity Testing, Hardness Tester, Resistance & Deformation
TQC SHEEN Manual Cupping Test – SP4400
Adhesion, Elasticity Testing, Hardness Tester, Resistance & DeformationTQC SHEEN Manual Cupping Test – SP4400
The TQC Sheen Manual Cupping Test is a revolutionary apparatus for testing the resistivity of coatings at various stages of deformation in accordance
with ISO 1520. The built in gear-box minimizes the manual force which is required to deform the test panel,
allowing to perform a smooth deformation. The degree or deformation is digitally displayed at a resolution of
0.01 mm. Mandatory test in Qualicoat, QIB and GSB accredited laboratories.SKU: SP4400 - Application Tables, ASTM D823, Automatic Film Applicator, Film Application
Automatic Film Applicator Standard – AB4120 , AB4220 , AB4320 , AB4400, AB4405, AB4420
Application Tables, ASTM D823, Automatic Film Applicator, Film ApplicationAutomatic Film Applicator Standard – AB4120 , AB4220 , AB4320 , AB4400, AB4405, AB4420
The Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils. A heated model is also available.
SKU: n/a - ASTM D823, Automatic Film Applicator, Drying Time, Film Application
Compact Automatic Film Applicator – AB3652
ASTM D823, Automatic Film Applicator, Drying Time, Film ApplicationCompact Automatic Film Applicator – AB3652
The TQC Sheen Compact Automatic Film Applicator application speed can be set from 1 to 150 mm/s. The Compact model is suitable for both wire wound rod applicators and block applicators. Operating is easy through the standard TQC Sheen operating interface. The Automatic Film Applicator Compact Compact is available with a glass bed or a perforated vacuum bed sold separately.
SKU: AB3652 - Abrasion Testing, Hardness / Scratch Resistance, Hardness Tester, Scratch Testing
Comprehensive Abrasion Test TB5000 & TB5005
Abrasion Testing, Hardness / Scratch Resistance, Hardness Tester, Scratch TestingComprehensive Abrasion Test TB5000 & TB5005
The Comprehensive Abrasion Test is a universal test machine to test the coating abrasion resistance on beverage cans or flat materials. The reciprocating motion mimics in-the-field transportation abrasion damage of coatings equivalent to the Gavarti Associates “GV-CAT” system. The Comprehensive Abrasion Test is used in coating test laboratories for quality control work.
SKU: n/a - ISO 2812-5, Temperature, Temperature and Climatic Testing
TQC Sheen CureView Gradient Oven – AB6800
The CureView Gradient Oven is a flexible oven that allows the user to heat up test panels on a glass bed to a variety of temperature profiles. CureView Gradient Oven 230/110 VAC CureView Gradient Oven 230/110 VAC.
SKU: AB6800 - Abrasion Testing, ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, Hardness / Scratch Resistance, Hardness Tester, ISO 11998, Scrub Abrasion | Washability Tester Supplies & Accessories, Wet Abrasion Scrub | Washability Test
Scrub Abrasion and Washability Tester AB6000 & AB6010
Abrasion Testing, ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, Hardness / Scratch Resistance, Hardness Tester, ISO 11998, Scrub Abrasion | Washability Tester Supplies & Accessories, Wet Abrasion Scrub | Washability TestScrub Abrasion and Washability Tester AB6000 & AB6010
The Scrub Abrasion and Washability Tester tests the resistance of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion.
SKU: n/a - Temperature, Temperature and Climatic Testing
Thermometer ST-610B with TC type K input – TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mmSKU: TE1000 - Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1000
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - ASTM D823, Automatic Film Applicator, Film Application
TQC SHEEN Small Automatic Panel Sprayer (1 gun) (4500N) – SH0586
ASTM D823, Automatic Film Applicator, Film ApplicationTQC SHEEN Small Automatic Panel Sprayer (1 gun) (4500N) – SH0586
TQC Sheen Small Automatic Panel Sprayer, 1 gun (previously 4500N) with configurable lift settings. It also has a switch with custom predefined Lift factory settings. The lift setting can be configured in steps of 10mm up to maximum of 500mm.
SKU: SH0586 - ASTM D823, Automatic Film Applicator, Film Application
TQC SHEEN Medium Automatic Panel Sprayer (2 guns) (4700N) – SH0590
ASTM D823, Automatic Film Applicator, Film ApplicationTQC SHEEN Medium Automatic Panel Sprayer (2 guns) (4700N) – SH0590
TQC Sheen Medium Automatic Panel Sprayer, 2 guns (previously 4700N). The models SH0582 and SH0581 are 2 new models, which are also based on Sheen models 4500N and 4700N, however with configurable lift settings.
SKU: SH0590 - Film Application
4-Sided Film Applicator, Dual Reservoir, 100|200|300|400ΜM – VF2179
Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.
SKU: VF2179 - Film Application
4-SIDED FILM APPLICATORS
The TQC 4-Sided Film Applicator (Quadruplex) has four application sides to apply paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is equipped with a removable lateral guidance support for straight application. The high grade stainless steel will not be affected by acid or base elements.
SKU: n/a - Moisture, Temperature and Climatic Testing
TQC SHEEN Concrete Moisture Meter – LI9200
The TQC Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just pressing the instrument against the concrete surface.
SKU: LI9200 - Moisture, Moisture Meters
Skipper Plus Moisture Detector – LI9012
Non-destructive moisture detector for locating damp in laminated plastics such as polyester, and in wood. Equipped with sort rubber electrodes, which absolutely do not damage the surface. Three moisture ranges for detecting moisture in both fresh and salt water.
Specially developed for osmosis-control and measuring or moisture before commencing with paint work on yachts.
SKU: LI9012 - Moisture, Temperature and Climatic Testing
Tramex Concrete Moisture Encounter – LI9021
Non-destructive instrument for measuring moisture levels in concrete and sand-cement floors. Measurements or up to a few centimeters deep can be taken without damaging the surface. Ideal when laying parquet floors, floor coverings or floor coatings. Versatile, precise and easy to use, the CME4 allows the user to make multiple tests over a large area in the shortest possible time.
SKU: LI9021
