No products in the cart.
Accessory Products, Adhesion Accessories
Dollies for Adhesion Testers
Loading fixtures, stubs for adhesion testing.
Loading fixtures, stubs for adhesion testing.
| Weight | .25 lbs |
|---|---|
| Dimensions | 10 × 1 × 1 in |
| Choose Size and Quantity | Size: 50 mm x 50 mm Quantity: 4, Size: 10 mm Quantity: 100, Size: 14 mm Quantity: 10, Size: 10 mm Quantity: 10, Size: 50 mm x 50 mm Plate Quantity: 4, Size: 14 mm Quantity: 100, Size: 50 mm Quantity: 4, Size: 50 mm C1583 Quantity: 2, Size: 50 mm Quantity: 50, Size: 20 mm Quantity: 100, Size: 20 mm Quantity: 10 |
You may also like…
- Adhesion
PosiTest AT Pull-off Adhesion Tester – Manual or Automatic
The PosiTest AT Pull-off Adhesion Tester uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface. Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit.
SKU: n/a - Accessory Products, Adhesion Accessories
PosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Accessory Products, Adhesion AccessoriesPosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The PosiTest® AT Verifier and included documents allow the user to certify the accuracy of PosiTest® Adhesion Testers.
- High precision load cell and handheld smart sensor indicator
- Peak hold and real time reading display
- Bonded foil strain gages are hermetically sealed for protection against industrial environments
- Ready to use with all PosiTest® Pull-Off Adhesion Testers
- Ideal for field or laboratory use
- Fitted with a permanent steel 20 mm loading fixture (dolly). A conversion factor is used to verify other sizes
SKU: ATVERIFY - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100
Related products
- Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1100 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1100
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856
