Showing all 18 results
The byko-test gauge offers a unique solution to monitor environmental conditions by measuring Film thickness Fe/NFe, Dew Point, Air Temperature, and Relative Humidity all in one.
There is also a dry film thickness only version available, the byko-test Lite.
The byko-test lite is a Ferrous/Non-Ferrous coating thickness gauge with a compact design for easy handling. The gauge body is made from impact resistant material and it’s easy to use. The operate buttons are large for users wearing gloves. It automatically recognizes the substrate and switches to the correct setting. An automatic switch-off ensures long battery life. The large color display with a backlight is readable in high and low lighting conditions. The display will automatically rotate to the correct viewing position. In the statistic mode average, minimum, maximum, and standard deviation are displayed. The measurements are automatically stored and downloadable to a PC with the optional USB cable and software.
The Gardco 17025 Certified Dry Film Thickness Plastic Shims are dry film thickness standards used for calibration of all brands of dry film thickness gauges.
They are used to verify calibration of dry film thickness gauges on a routine basis as required by SSPC PA2 and ASTM D7091. They are color coded, marked in both mil and micron scales and come in 14 different sizes.
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.
The PosiTector 6000 Coating Thickness Gauge is available in 2 models: the PosiTector 6000 Standard and Advanced. There are many probes to choose from either with a PosiTector 6000 gauge body or you may purchase a probe separately. See the PosiTector 6000 descriptions and downloadable pdf brochures in the description area below for more info.
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculations
SP1000
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclip
The TQC Film thickness gauge is a high precision film and foil thickness gauge, especially developed for measuring so-called “replica tapes” as Testex®, used mainly to measure the surface profile.
Testex Micrometer Dial Thickness Gage, Metric Units. To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.
Rectangular promotion measuring comb with a range of 1-80 Microns. Made of top-quality, weather-resistant aluminum. Special printing possible with larger orders. Minimum Order quantity is 25.
The TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet film thickness measurement for ISO or customer requirements. One side of the comb measures the wet film thickness in µm (30 steps between 25 and 900µm)., the other side measures in mills (30 steps between 1 and 35 mils)
One set TQC Wet Film Combs contains 500 pieces.
The TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet film thickness measurement for ISO or customer requirements. One side of the comb measures the wet film thickness in µm (30 steps between 25 and 900µm)., the other side measures in mills (30 steps between 1 and 35 mils)
One set TQC Wet Film Combs contains 100 pieces.
The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.
This Wet Film Thickness Wheel is specially developed for use on wet lacquers, paint and coil coated surfaces. Equipped with a precision roller-bearing for smooth rolling over the surface . The wheel has three rims, the inner rim being eccentric to the two outer rims. The outer rings are notched for a firm grip on the surface to prevent slipping. Made of stainless steel with an aluminum grip.
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
