No products in the cart.
Coating Thickness Gages
Showing all 20 results
- Coating Thickness Gages, Dry Film Thickness, Film Thickness, Thickness Testing
Byko-Test Lite Coating Thickness Gauge
Coating Thickness Gages, Dry Film Thickness, Film Thickness, Thickness TestingByko-Test Lite Coating Thickness Gauge
The byko-test lite is a Ferrous/Non-Ferrous coating thickness gauge with a compact design for easy handling. The gauge body is made from impact resistant material and it’s easy to use. The operate buttons are large for users wearing gloves. It automatically recognizes the substrate and switches to the correct setting. An automatic switch-off ensures long battery life. The large color display with a backlight is readable in high and low lighting conditions. The display will automatically rotate to the correct viewing position. In the statistic mode average, minimum, maximum, and standard deviation are displayed. The measurements are automatically stored and downloadable to a PC with the optional USB cable and software.
SKU: DF-B3791 - Climate Testing, Coating Thickness Gages, Density, Dewpoint, Dry Film Thickness, Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Coating Thickness Gauge & Probes
Climate Testing, Coating Thickness Gages, Density, Dewpoint, Dry Film Thickness, Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Coating Thickness Gauge & Probes
The PosiTector 6000 Coating Thickness Gauge is available in 2 models: the PosiTector 6000 Standard and Advanced. There are many probes to choose from either with a PosiTector 6000 gauge body or you may purchase a probe separately. See the PosiTector 6000 descriptions and downloadable pdf brochures in the description area below for more info.
SKU: n/a - Coating Thickness Gages, Contactless Film Thickness, Dry Film Thickness, Film Thickness, Powder Coating, Thickness Testing, Wet Film Thickness
Coatmaster Flex Paint Thickness Gauge – LD5864
Coating Thickness Gages, Contactless Film Thickness, Dry Film Thickness, Film Thickness, Powder Coating, Thickness Testing, Wet Film ThicknessCoatmaster Flex Paint Thickness Gauge – LD5864
CALL FOR PRICING AND AVAILABILITY
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.
SKU: LD5864 - Coating Thickness Gages, Dry Film Thickness, Film Thickness, Powder Coating
DeFelsko PosiTest DFT Coating Thickness Gage
Coating Thickness Gages, Dry Film Thickness, Film Thickness, Powder CoatingDeFelsko PosiTest DFT Coating Thickness Gage
The PosiTest DFT Coating Thickness Gage measures coatings on ALL metals. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments.SKU: n/a - Coating Thickness Gages, Dry Film Thickness, Film Thickness, Thickness Testing
17025 Certified Dry Film Thickness Shims
Coating Thickness Gages, Dry Film Thickness, Film Thickness, Thickness Testing17025 Certified Dry Film Thickness Shims
The Gardco 17025 Certified Dry Film Thickness Plastic Shims are dry film thickness standards used for calibration of all brands of dry film thickness gauges.
They are used to verify calibration of dry film thickness gauges on a routine basis as required by SSPC PA2 and ASTM D7091. They are color coded, marked in both mil and micron scales and come in 14 different sizes.
SKU: n/a - Coating Thickness Gages, Dry Film Thickness, Thickness Testing
PosiTest F/FM/G/GM Coating Thickness Gage
Coating Thickness Gages, Dry Film Thickness, Thickness TestingPosiTest F/FM/G/GM Coating Thickness Gage
POSITEST F/FM/G/GM COATING THICKNESS GAGE
Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel – PosiTest magnetic pull-off thickness gage (banana gauge) for the non-destructive measurement of non-magnetic coatings (paint, enamel, galvanizing, metalizing, plating, etc.) on steel.Highly wear resistant Carbide Probe for longest life and continuous accuracy
Extra rugged housing, not affected by mechanical shock, water, acid or solvents
Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
Positive visual and audible indicators to designate when thickness reading is established
“V” grooves in probe housing and gage base allow correct positioning on cylindrical objects
Certificate of Calibration showing traceability to PTB included (Long Form)Conforms to ASTM D7091/B499, ISO 2808 and others
SKU: n/a - Coating Thickness Gages
POSIPEN A – LD6000
PEN TYPE FERROUS THICKNESS GAGE .25-20 MILS
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Used for:
Small, hot or hard-to-reach surfaces
Spot Checks – conveniently fits in a shirt pocket
Hot Sprayed CoatingsIdeal for:
Refineries, petrochemical plants
Platers – electroplating, chrome, zinc, galvanizing
Powder coatersSKU: LD6000 - Coating Thickness Gages, Dry Film Thickness, Thickness Testing
PosiPen® Magnetic Pull-Off Coating Thickness Gage
Coating Thickness Gages, Dry Film Thickness, Thickness TestingPosiPen® Magnetic Pull-Off Coating Thickness Gage
PosiPen® has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces.
SKU: PEN - Adhesion Accessories, Coating Thickness Gages
PosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Adhesion Accessories, Coating Thickness GagesPosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The PosiTest® AT Verifier and included documents allow the user to certify the accuracy of PosiTest® Adhesion Testers.
- High precision load cell and handheld smart sensor indicator
- Peak hold and real time reading display
- Bonded foil strain gages are hermetically sealed for protection against industrial environments
- Ready to use with all PosiTest® Pull-Off Adhesion Testers
- Ideal for field or laboratory use
- Fitted with a permanent steel 20 mm loading fixture (dolly). A conversion factor is used to verify other sizes
SKU: ATVERIFY - Coating Thickness Gages, Film Thickness, Wet Film Thickness
PLASTIC WET FILM COMB 500 Count – LD2020
The TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet film thickness measurement for ISO or customer requirements. One side of the comb measures the wet film thickness in µm (30 steps between 25 and 900µm)., the other side measures in mills (30 steps between 1 and 35 mils)
One set TQC Wet Film Combs contains 500 pieces.
SKU: LD2020 - Coating Thickness Gages, Film Thickness, Wet Film Thickness
PLASTIC WET FILM COMB 100 Count – LD2021
The TQC Wet Film Comb made of plastic, to measure wet film thickness between 25 and 900µm. The TQC Wet Film Comb is designed as a disposable thickness gauge. It can be kept as a record of wet film thickness measurement for ISO or customer requirements. One side of the comb measures the wet film thickness in µm (30 steps between 25 and 900µm)., the other side measures in mills (30 steps between 1 and 35 mils)
One set TQC Wet Film Combs contains 100 pieces.
SKU: LD2021 - Coating Thickness Gages, Film Thickness, ISO 2808, JIS Z2371, Thickness Testing, Wet Film Thickness, ГОСТ Р 51694
Wet Film Thickness Gauge Stainless Steel
Coating Thickness Gages, Film Thickness, ISO 2808, JIS Z2371, Thickness Testing, Wet Film Thickness, ГОСТ Р 51694Wet Film Thickness Gauge Stainless Steel
The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.
SKU: n/a - Coating Thickness Gages, Film Thickness, ISO 2808, JIS Z2371, Thickness Testing, Wet Film Thickness, ГОСТ Р 51694
Wet Film Thickness Wheel
Coating Thickness Gages, Film Thickness, ISO 2808, JIS Z2371, Thickness Testing, Wet Film Thickness, ГОСТ Р 51694Wet Film Thickness Wheel
This Wet Film Thickness Wheel is specially developed for use on wet lacquers, paint and coil coated surfaces. Equipped with a precision roller-bearing for smooth rolling over the surface . The wheel has three rims, the inner rim being eccentric to the two outer rims. The outer rings are notched for a firm grip on the surface to prevent slipping. Made of stainless steel with an aluminum grip.
SKU: n/a - Coating Thickness Gages, Dry Film Thickness, Film Thickness, Thickness Testing
NON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Coating Thickness Gages, Dry Film Thickness, Film Thickness, Thickness TestingNON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.SKU: STDSHIMS - Coating Thickness Gages, Dry Film Thickness, Thickness Testing
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Each shim is packaged in a protective sleeve
- Certificate of Calibration showing traceability to PTB is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
SKU: n/a - Coating Thickness Gages, Dry Film Thickness, Film Thickness, PosiTector® 6000, Thickness Testing
Certified Coated Metal Plates & Certified Polystyrene Blocks
Coating Thickness Gages, Dry Film Thickness, Film Thickness, PosiTector® 6000, Thickness TestingCertified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.SKU: n/a
