No products in the cart.
Shop
Showing 1–48 of 556 results
- Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000
Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
The Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT.
See Datasheet for Basic and Full kit comparisons
SKU: n/a - Amine Blush Kit, Inks and Coatings, PH / Conductivity
Amine Blush Kit – SP7500
The TQC Amine Blush Kit is a multi step amine blush indicator. Due to advanced research on suitable media the TQC Amine Blush Kit is the most advanced kit on the marked. Based on a double color change the indicator is the first to implement this multi step color change.
SKU: SP7500 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (cutting wheel not included) VF1856
The Cross Cut Adhesion Test Kit CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
SKU: VF1856 - Adhesion, ASTM D3359, ISO 2409, Materials Testing, Scratch Testing, ГОСТ 15140
CC2000 Cross Cut Adhesion Test Kit (excluding knife) SP1666
Adhesion, ASTM D3359, ISO 2409, Materials Testing, Scratch Testing, ГОСТ 15140CC2000 Cross Cut Adhesion Test Kit (excluding knife) SP1666
The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
Frequently used and standardized instrument to test the adhesion of dry coatings on their substrate.
SKU: SP1666 - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Adhesion, Adhesion (Wood), Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000 - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Adhesion, BS EN ISO8502-2, Surface Cleanliness/Preperations
TQC Dust Test Kit – SP3200
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3200 - Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250 - Adhesion
PosiTest AT Pull-off Adhesion Tester – Manual or Automatic
The PosiTest AT Pull-off Adhesion Tester uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface. Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit.
SKU: n/a - Adhesion, Elasticity Testing, Hardness Tester, Resistance & Deformation
TQC SHEEN Manual Cupping Test – SP4400
Adhesion, Elasticity Testing, Hardness Tester, Resistance & DeformationTQC SHEEN Manual Cupping Test – SP4400
The TQC Sheen Manual Cupping Test is a revolutionary apparatus for testing the resistivity of coatings at various stages of deformation in accordance
with ISO 1520. The built in gear-box minimizes the manual force which is required to deform the test panel,
allowing to perform a smooth deformation. The degree or deformation is digitally displayed at a resolution of
0.01 mm. Mandatory test in Qualicoat, QIB and GSB accredited laboratories.SKU: SP4400 - Adhesion Accessories
PosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The PosiTest® AT Verifier and included documents allow the user to certify the accuracy of PosiTest® Adhesion Testers.
- High precision load cell and handheld smart sensor indicator
- Peak hold and real time reading display
- Bonded foil strain gages are hermetically sealed for protection against industrial environments
- Ready to use with all PosiTest® Pull-Off Adhesion Testers
- Ideal for field or laboratory use
- Fitted with a permanent steel 20 mm loading fixture (dolly). A conversion factor is used to verify other sizes
SKU: ATVERIFY - Adhesion Accessories
Pelican Case for PosiTest AT-A Pull-Off Adhesion Testers
Heavy-duty, waterproof Pelican case complete with a custom foam insert to securely hold your PosiTest AT-A instrument. Pelican cases can be purchased as an upgrade from the standard case at the time of purchase, or as an accessory.
Waterproof
Two easy open Press & Pull latches
Comfortable double-layered, soft-grip handle
Strong, lightweight
Two padlockable hasps
Meets airline regulations for carry-on luggage*
*Check with your airline for exact measurement requirementsEXTERIOR (L X W X D)
18.20″ x 13.40″ x 6.70″ (46.2 x 34 x 17 cm)SKU: CASEATAB-P - RAL Effect
RAL E3 Effect
RAL E3 Effect Fan Deck – In the RAL EFFECT E3 color fan you will experience the fascinating tension and harmony in the combination of solid and metallic colors! With an overview of a total of 490 color tones, the color fan presents the brilliant variety of nuances and the practical, application-related color spectrum of the RAL EFFECT color collection. It expands the space of your creative designs visibly and inspiringly!
SKU: VF6615 - Application Tables, ASTM D823, Automatic Film Applicator, Film Application
Automatic Film Applicator Standard – AB4120 , AB4220 , AB4320 , AB4400, AB4405, AB4420
Application Tables, ASTM D823, Automatic Film Applicator, Film ApplicationAutomatic Film Applicator Standard – AB4120 , AB4220 , AB4320 , AB4400, AB4405, AB4420
The Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils. A heated model is also available.
SKU: n/a - ASTM D823, Automatic Film Applicator, Drying Time, Film Application
Compact Automatic Film Applicator – AB3652
ASTM D823, Automatic Film Applicator, Drying Time, Film ApplicationCompact Automatic Film Applicator – AB3652
The TQC Sheen Compact Automatic Film Applicator application speed can be set from 1 to 150 mm/s. The Compact model is suitable for both wire wound rod applicators and block applicators. Operating is easy through the standard TQC Sheen operating interface. The Automatic Film Applicator Compact Compact is available with a glass bed or a perforated vacuum bed sold separately.
SKU: AB3652 - Abrasion Testing, Hardness / Scratch Resistance, Hardness Tester, Scratch Testing
Comprehensive Abrasion Test TB5000 & TB5005
Abrasion Testing, Hardness / Scratch Resistance, Hardness Tester, Scratch TestingComprehensive Abrasion Test TB5000 & TB5005
The Comprehensive Abrasion Test is a universal test machine to test the coating abrasion resistance on beverage cans or flat materials. The reciprocating motion mimics in-the-field transportation abrasion damage of coatings equivalent to the Gavarti Associates “GV-CAT” system. The Comprehensive Abrasion Test is used in coating test laboratories for quality control work.
SKU: n/a - ISO 2812-5, Temperature, Temperature and Climatic Testing
TQC Sheen CureView Gradient Oven – AB6800
The CureView Gradient Oven is a flexible oven that allows the user to heat up test panels on a glass bed to a variety of temperature profiles. CureView Gradient Oven 230/110 VAC CureView Gradient Oven 230/110 VAC.
SKU: AB6800 - ASTM D1640, Drying Time, ISO 9117-4
Gardco Quadracycle Drying Time Recorder
Quadracycle Electronic Drying Time Recorder: The Gardco Quadracycle Drying Time Recorder measures and records drying times of all types of coatings, adhesives, etc. It will record drying times for 1, 6, 12 and 24 hour tests.
SKU: Gardco-11326 - ASTM D1640, ASTM D5895, Drying Time, ISO 9117-4
Gardco Ultracycle RHT Drying Time Recorder
Gardco Ultracycle RHT Drying Time Recorder: The Gardco Electronic Ultracycle RHT Circular Drying Time Recorder has relative humidity and temperature measurement. Designed to control a motor so that its shaft driven 3/8″ teflon stylus will complete one rotation in a period which can be programmed from 1 minute to 99 hours, 59 minutes.
SKU: Gardco-11325 - ASTM D7091, Dewpoint, Dry Film Thickness Gauges, SSPC PA-2, Temperature, Temperature and Climatic Testing, Thickness Testing
Byko-Test Coating Thickness Gauge
ASTM D7091, Dewpoint, Dry Film Thickness Gauges, SSPC PA-2, Temperature, Temperature and Climatic Testing, Thickness TestingByko-Test Coating Thickness Gauge
The byko-test gauge offers a unique solution to monitor environmental conditions by measuring Film thickness Fe/NFe, Dew Point, Air Temperature, and Relative Humidity all in one.
There is also a dry film thickness only version available, the byko-test Lite.
SKU: DF-B3790 - Climate Testing, Density, Dewpoint, Dry Film Thickness, Dry Film Thickness Gauges, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Coating Thickness Gauge & Probes
Climate Testing, Density, Dewpoint, Dry Film Thickness, Dry Film Thickness Gauges, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Coating Thickness Gauge & Probes
PosiTector 6000 Coating Thickness Gauge and Probes: Gauge Body comes in Standard and Advanced. Order probe with or without a gauge body.
SKU: n/a - Contactless Film Thickness, Dry Film Thickness, Dry Film Thickness Gauges, Paint Thickness Gauge, Powder Coating, Thickness Testing, Wet Film Thickness, Wet Film Thickness
Coatmaster Flex Paint Thickness Gauge – LD5864
Contactless Film Thickness, Dry Film Thickness, Dry Film Thickness Gauges, Paint Thickness Gauge, Powder Coating, Thickness Testing, Wet Film Thickness, Wet Film ThicknessCoatmaster Flex Paint Thickness Gauge – LD5864
CALL FOR PRICING AND AVAILABILITY
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.
SKU: LD5864
