No products in the cart.
Adhesion
Cross Cut Adhesion Test Kit CC1000 (cutting wheel not included) VF1856
The Cross Cut Adhesion Test Kit CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
$225.00
Cross Cut Adhesion Test Kit CC1000
Description
The Cross Cut Adhesion Test KIT CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Tape can be ordered as a spare.
ADD KNIFES/BLADES SEPARATELY. KNIVES NOT INCLUDED IN KIT.
| Article code | Cross cut knives ISO (5×5 pattern) | Cross cut knives ASTM (10×10 pattern) | |||
| CC1000 kit | VF1856 | 1mm 2mm 3mm | VF2355 VF2357 VF2358 | 1mm 1,5mm | VF2359 VF1861 |
| CC1000 basic | VF1848 | ||||
| CC2000 kit | SP1666 | 1mm 2mm 3mm | SP1702 SP1703 SP1704 | 1mm 1,5mm | SP1705 SP1706 |
| CC2000 basic | SP1665 | ||||
Documents
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Part No. | VF1839 – 6 blades, cutting distance 1 mm Acc to ISO 2409 & ASTM D3359, VF1842 – 6 blades, cutting distance 2 mm Acc. to ISO 2409 & ASTM D3359, VF1844 – 6 blades, cutting distance 3 mm Acc. to ISO 2409, VF1846 – 11 blades, cutting distance 1 mm Acc. to ASTM D3359 2009, VF1847 – 11 blades, cutting distance 1.5 mm Acc. to ASTM D3359 2009 |
| MATERIAL | Aluminium, Rubber, Vacuum Hardened Stainless Steel |
|---|---|
| DIMENSIONS | 19x52x155 mm / 0.75×2.05×6.1 inch |
| MASS | 331 g / 11.68 oz |
Related products
- Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000
Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
The Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT.
See Datasheet for Basic and Full kit comparisons
SKU: n/a - Adhesion, BS EN ISO8502-2, Surface Cleanliness/Preperations
TQC Dust Test Kit – SP3200
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3200
