No products in the cart.
DeFelsko
Showing all 38 results
- Adhesion
PosiTest AT Pull-off Adhesion Tester – Manual or Automatic
The PosiTest AT Pull-off Adhesion Tester uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface. Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit.
SKU: n/a - Accessory Products, Adhesion Accessories
PosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Accessory Products, Adhesion AccessoriesPosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The PosiTest® AT Verifier and included documents allow the user to certify the accuracy of PosiTest® Adhesion Testers.
- High precision load cell and handheld smart sensor indicator
- Peak hold and real time reading display
- Bonded foil strain gages are hermetically sealed for protection against industrial environments
- Ready to use with all PosiTest® Pull-Off Adhesion Testers
- Ideal for field or laboratory use
- Fitted with a permanent steel 20 mm loading fixture (dolly). A conversion factor is used to verify other sizes
SKU: ATVERIFY - Climate Testing, Coating Thickness Gages, Density, Dewpoint, DFT Dry Film Thickness Gauges, Dry Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Standard/Advanced Body | DeFelsko
Climate Testing, Coating Thickness Gages, Density, Dewpoint, DFT Dry Film Thickness Gauges, Dry Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Standard/Advanced Body | DeFelsko
PosiTector 6000 Coating Thickness Gauge and Probes: Gauge Body comes in Standard and Advanced. Order probe with or without a gauge body. Scroll down to the ordering table to easily add items to your cart.
SKU: n/a - AS3894.1, ASTM D4787, ASTM D5162, ASTM D6747, ASTM D7953, ASTM G62, ISO 29601, NACE SP0188, Pinhole & Porosity Holiday Detectors, SP0274, SP0490
PosiTest HHD High Voltage Holiday Detector
AS3894.1, ASTM D4787, ASTM D5162, ASTM D6747, ASTM D7953, ASTM G62, ISO 29601, NACE SP0188, Pinhole & Porosity Holiday Detectors, SP0274, SP0490PosiTest HHD High Voltage Holiday Detector
The PosiTector HHD High Voltage Holiday Detector detects holidays, porosity, pinholes, leaks, and other discontinuities in coatings, linings, and membranes using pulse DC
-Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue
-Regulated pulse DC voltage output that won’t change under load— ±5% voltage accuracy
-Voltage calculator feature—choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage
-Extensive electrode options—choose from a wide range of rolling spring and flat wire brush electrodes or use electrodes from other manufacturers with optional adaptors—custom sizes available upon request
Long Form Certificate of Calibration included with each instrumentConforms to ASTM D4787/D5162/D6747/D7953/G62, ISO 29601, NACE SP0188/SP0274/SP0490, AS3894.1
SKU: n/a - Climate Testing, Dewpoint
Dew Point Meter Logger PosiTector DPM and DPM L+
Magnetic probes attach to steel structures for monitoring climatic conditions. Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, difference between surface and dew point temperatures, and wet bulb temperature.
- Fast response, precision sensors provide accurate, repeatable readings
- Environmentally sealed enclosure – weatherproof, dustproof, and shockproof—meets or exceeds IP65
- Internal memory storage of 10,000 datasets (60,000 readings)
Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32SKU: DPMLPLUS - Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
DeFelsko Certified Plastic Shims
Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness TestingDeFelsko Certified Plastic Shims
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Each shim is packaged in a protective sleeve
- Certificate of Calibration showing traceability to PTB is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
SKU: n/a - Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories
High Accuracy Burnishing Tool
Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage AccessoriesHigh Accuracy Burnishing Tool
Burnishing tool includes a built-in spring mechanism ensuring that consistent force is used, regardless of how hard the tool is pressed against the surface
SKU: RTBURNISHHA - Accessory Products, Pinhole & Porosity Holiday Detector Accessories
Electrode Adaptors for PosiTest HHD
Accessory Products, Pinhole & Porosity Holiday Detector AccessoriesElectrode Adaptors for PosiTest HHD
Electrode Adaptors for PosiTest HHD connect to spring and brush electrodes from other manufacturers — choose between PCWI, Tinker & Rasor, and 266 & 280 adaptors (adaptor not required for SPY electrodes)
SKU: n/a - PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile
Replica Tape Holder
PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface ProfileReplica Tape Holder
For Replica Tape Holder best results and to minimize the migration of adhesive from the tape to the probes measurement system, DeFelsko recommends using the supplied tape holder. For PosiTector RTR Replica Tape Holder
SKU: RTRTAPEHLDR - Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile
Cleaning Cards for PosiTector RTR (20-Pack)
Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface ProfileCleaning Cards for PosiTector RTR (20-Pack)
Cleaning Cards for PosiTector RTR are pre-moistened with isopropyl alcohol to clean residual adhesive and debris from the anvils to insure an accurate test.
SKU: RTRCLEANCARD - Accessory Products, DFT Dry Film Thickness Gauges, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories, Thickness Testing
PosiTector SPG Certified Standards
Accessory Products, DFT Dry Film Thickness Gauges, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories, Thickness TestingPosiTector SPG Certified Standards
The PosiTector SPG Certified Standards are traceable height standards mounted to a metal plate with calibration guide for recalibrating depth micrometer probes.
SKU: STDSPG
