No products in the cart.
Surface Cleanliness/Preperations
Showing all 18 results
- PH / Conductivity, Salt/Chloride Testing, Sample Preparation, Sample Testing, Surface Cleanliness/Preperations
TQC SHEEN Bresle Kit chloride test – SP7310
PH / Conductivity, Salt/Chloride Testing, Sample Preparation, Sample Testing, Surface Cleanliness/PreperationsTQC SHEEN Bresle Kit chloride test – SP7310
The TQC SHEEN Bresle Kit bresle kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit – Sodium Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates. Read more in the description.
SKU: SP7310 - Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000
Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
The Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT.
See Datasheet for Basic and Full kit comparisons
SKU: n/a - Adhesion, BS EN ISO8502-2, Surface Cleanliness/Preperations
TQC Dust Test Kit – SP3200
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3200 - Pictorial Surface Standards, Surface Cleanliness/Preperations
The Paint Inspector’s Field Guide Version 2 – LD3085
Pictorial Surface Standards, Surface Cleanliness/PreperationsThe Paint Inspector’s Field Guide Version 2 – LD3085
The Paint Inspector’s Field Guide
Industrial Physics offers instruments for testing and analyzing paint, coatings and general surface treatments used across industries ranging from transportation infrastructure to marine, beverage and canning and automotive.
The Paint Inspector’s Field Guide from Industrial Physics is a must have tool for any professional concerned with protective coatings that prevent corrosion.
The inspection of protective coating systems for corrosion control involves a wide range of test methods and techniques. The Paint Inspector’s Field Guide explores the various inspection methods available and describes the basic fundamentals of protective coating inspection to support those working in the field.
Authored by Lee Wilson, a highly qualified and well respected inspector with many years of field experience, the Guide provides an overview of the procedures and tools used by inspectors to perform specification review, surface preparation, application and final reporting.
In addition, the Paint Inspector’s Field Guide comprises a wide range of inspection and application notes, making it easy to solve problems which are commonly encountered in the field. The following guide provides support in the form of detailed textual analysis and visual references of inspection techniques and standards, as well as commonly encountered defects.
SKU: LD3085 - ISO 8502-3, Surface Cleanliness/Preperations
Spring Loaded Roller For Dust Test Tape – SP3600
The TQC Spring Loaded Roller is used to perform objective dust tests according ISO 8502-3, and eliminates the human error by pressing with a constant force on the dust test tape. The ISO 8502-3 quantifies the quantity and size of dust particles on surfaces prepared for painting using a standardized tape for dust test. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish.
The Spring Loaded Roller presses the tape onto the surface with a constant force of 44,13 Newton (4,5kg) by means of a spring system, four wheels, and a special rubber roll with a specified hardness. The apparatus is made of titanium anodized aluminum.
The TQC Dust Test Kit, is available separately.
SKU: SP3600 - PH / Conductivity, Salt/Chloride Testing, Surface Cleanliness/Preperations
CHLOR*TEST Kit (50 tests) – SP7309
PH / Conductivity, Salt/Chloride Testing, Surface Cleanliness/PreperationsCHLOR*TEST Kit (50 tests) – SP7309
CHLOR*TEST was developed for ease of use and to prevent outside and cross contamination. The components are premeasured to ensure accurate results in parts per million and micrograms per square centimeter. In addition, no temperature correction is needed for 5°C to 80°C (41°F to 176° F). Field test inspectors around the world will use this innovative product with confidence on virtually any surface at any angle.
SKU: SP7309 - Salt/Chloride Testing, Surface Characteristics Accessories, Surface Cleanliness/Preperations
TQC Sheen Bresle Patches + Needle – LD6515
Salt/Chloride Testing, Surface Characteristics Accessories, Surface Cleanliness/PreperationsTQC Sheen Bresle Patches + Needle – LD6515
The new TQC Sheen Bresle Patches + Needle is stronger, whilst at the same time has a clean removal, negligible patch contamination, no breaking foam and is silicone-free.
TQC Sheen Bresle Patches, 25 pieces + needle
SKU: LD6515 - Dry Film Thickness, Film Thickness, Surface Cleanliness/Preperations, Surface Profile
Testex Spring Micrometer – Imperial and Metric
Dry Film Thickness, Film Thickness, Surface Cleanliness/Preperations, Surface ProfileTestex Spring Micrometer – Imperial and Metric
Testex Micrometer Dial Thickness Gage, Metric Units. To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.
SKU: n/a - Surface Characteristics Accessories, Surface Cleanliness/Preperations
Replacement Tape For Dust Test Kit – SP3209
Surface Characteristics Accessories, Surface Cleanliness/PreperationsReplacement Tape For Dust Test Kit – SP3209
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3209
