No products in the cart.
PH / Conductivity Accessories, Surface Cleanliness/Preperations
4.01pH buffer solution, 100ml – HI0007
4.01pH buffer solution, 100ml
$19.00
Related products
- Surface Characteristics Accessories, Surface Cleanliness/Preperations
Replacement Tape For Dust Test Kit – SP3209
Surface Characteristics Accessories, Surface Cleanliness/PreperationsReplacement Tape For Dust Test Kit – SP3209
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3209 - Salt/Chloride Testing, Surface Characteristics Accessories, Surface Cleanliness/Preperations
TQC Sheen Bresle Patches + Needle – LD6515
Salt/Chloride Testing, Surface Characteristics Accessories, Surface Cleanliness/PreperationsTQC Sheen Bresle Patches + Needle – LD6515
The new TQC Sheen Bresle Patches + Needle is stronger, whilst at the same time has a clean removal, negligible patch contamination, no breaking foam and is silicone-free.
TQC Sheen Bresle Patches, 25 pieces + needle
SKU: LD6515 - Adhesion, BS EN ISO8502-2, Surface Cleanliness/Preperations
TQC Dust Test Kit – SP3200
The TQC Dust Test Kit according to ISO 8502-3 allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. The dust test kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail test or as a permanent record of the presence of dust.
SKU: SP3200 - Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250
