No products in the cart.
ISO 8502-3, Surface Cleanliness/Preperations
Spring Loaded Roller For Dust Test Tape – SP3600
The TQC Spring Loaded Roller is used to perform objective dust tests according ISO 8502-3, and eliminates the human error by pressing with a constant force on the dust test tape. The ISO 8502-3 quantifies the quantity and size of dust particles on surfaces prepared for painting using a standardized tape for dust test. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish.
The Spring Loaded Roller presses the tape onto the surface with a constant force of 44,13 Newton (4,5kg) by means of a spring system, four wheels, and a special rubber roll with a specified hardness. The apparatus is made of titanium anodized aluminum.
The TQC Dust Test Kit, is available separately.
$575.00
ORDERING INFORMATION
SP3600
Spring loaded roller for Dust Test Tape and the TQC Dust Test Kit.
| Weight | 4 lbs |
|---|---|
| Dimensions | 13 × 10 × 5 in |
Related products
- PH / Conductivity, Salt/Chloride Testing, Surface Cleanliness/Preperations
CHLOR*TEST Kit (50 tests) Chlor-Test 50
PH / Conductivity, Salt/Chloride Testing, Surface Cleanliness/PreperationsCHLOR*TEST Kit (50 tests) Chlor-Test 50
CHLOR*TEST was developed for ease of use and to prevent outside and cross contamination. The components are premeasured to ensure accurate results in parts per million and micrograms per square centimeter. In addition, no temperature correction is needed for 5°C to 80°C (41°F to 176° F). Field test inspectors around the world will use this innovative product with confidence on virtually any surface at any angle.
SKU: Chlor-Test 50 - Pictorial Surface Standards, Surface Cleanliness/Preperations
The Paint Inspector’s Field Guide Version 2 – LD3085
Pictorial Surface Standards, Surface Cleanliness/PreperationsThe Paint Inspector’s Field Guide Version 2 – LD3085
The Paint Inspector’s Field Guide
Industrial Physics offers instruments for testing and analyzing paint, coatings and general surface treatments used across industries ranging from transportation infrastructure to marine, beverage and canning and automotive.
The Paint Inspector’s Field Guide from Industrial Physics is a must have tool for any professional concerned with protective coatings that prevent corrosion.
The inspection of protective coating systems for corrosion control involves a wide range of test methods and techniques. The Paint Inspector’s Field Guide explores the various inspection methods available and describes the basic fundamentals of protective coating inspection to support those working in the field.
Authored by Lee Wilson, a highly qualified and well respected inspector with many years of field experience, the Guide provides an overview of the procedures and tools used by inspectors to perform specification review, surface preparation, application and final reporting.
In addition, the Paint Inspector’s Field Guide comprises a wide range of inspection and application notes, making it easy to solve problems which are commonly encountered in the field. The following guide provides support in the form of detailed textual analysis and visual references of inspection techniques and standards, as well as commonly encountered defects.
SKU: LD3085 - Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000
