The new TQC Sheen Bresle Patches + Needle is stronger, whilst at the same time has a clean removal, negligible patch contamination, no breaking foam and is silicone-free.
TQC Sheen Bresle Patches, 25 pieces + needle
$125.00
bresle-patches-ld6515-d44-3-12.pdf (134.72 KB)
breslepatches-instructions-10.png (363.56 KB)
breslepatch-flyer-web-12.pdf (666.77 KB)
leaflet-digital-breslepatch-ld6515-12.pdf (1.14 MB)
The TQC Sheen Bresle patch conform ISO 8502-6 is a round self-adhesive plastic patch with a medical grade membrane and a known surface area. Due to the round shape it is stronger, whilst at the same time the patch has a clean removal, negligible patch contamination, no breaking foam and is silicon free. Each patch is certified and traceable. This unique Bresle patch is tested by global coating industry leaders.
Bresle patches are used to test for surface contaminants, such as salts. The patch is described in ISO 8502-6 and -9, also known as the Bresle Method. This Bresle method is commonly used to measure the level of surface salts prior to coating.
A too high level of salts may cause coating failures like blistering and corrosion. This might cause major problems and increase maintenance costs for shipping, vessels, ballast tanks, oil and gas piping, industry buildings and steel structures in general. That’s why measuring the level of salts prior to coating is essential.
TQC Sheen Bresle Patches, 25 pieces + needle
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
Dimensions: ø 55 mm / 2.17 inch + tab 15 mm / 0.59 inch
Material: Coated Protective Paper,PE with Acrylic Based Adhesive
Test Area: 1250 mm² / 1.94 in²
Volume: 2.5 ml
The PosiTector 6000 Coating Thickness Gauge is available in 2 models: the PosiTector 6000 Standard and Advanced. There are many probes to choose from either with a PosiTector 6000 gauge body or you may purchase a probe separately. See the PosiTector 6000 descriptions and downloadable pdf brochures in the description area below for more info.
The TQC Spring Loaded Roller is used to perform objective dust tests according ISO 8502-3, and eliminates the human error by pressing with a constant force on the dust test tape. The ISO 8502-3 quantifies the quantity and size of dust particles on surfaces prepared for painting using a standardized tape for dust test. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish.
The Spring Loaded Roller presses the tape onto the surface with a constant force of 44,13 Newton (4,5kg) by means of a spring system, four wheels, and a special rubber roll with a specified hardness. The apparatus is made of titanium anodized aluminum.
The TQC Dust Test Kit, is available separately.
The TQC SHEEN Bresle Kit bresle kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit – Sodium Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates. Read more in the description.
The Paint Inspector’s Field Guide
Industrial Physics offers instruments for testing and analyzing paint, coatings and general surface treatments used across industries ranging from transportation infrastructure to marine, beverage and canning and automotive.
The Paint Inspector’s Field Guide from Industrial Physics is a must have tool for any professional concerned with protective coatings that prevent corrosion.
The inspection of protective coating systems for corrosion control involves a wide range of test methods and techniques. The Paint Inspector’s Field Guide explores the various inspection methods available and describes the basic fundamentals of protective coating inspection to support those working in the field.
Authored by Lee Wilson, a highly qualified and well respected inspector with many years of field experience, the Guide provides an overview of the procedures and tools used by inspectors to perform specification review, surface preparation, application and final reporting.
In addition, the Paint Inspector’s Field Guide comprises a wide range of inspection and application notes, making it easy to solve problems which are commonly encountered in the field. The following guide provides support in the form of detailed textual analysis and visual references of inspection techniques and standards, as well as commonly encountered defects.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
