No products in the cart.
DFT Dry Film Thickness Gauges, Surface Cleanliness/Preperations, Surface Profile
Testex Spring Micrometer – Imperial or Metric
Testex Spring Micrometer Dial Thickness Gage. To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.
Testex Spring Micrometer Dial Thickness Gage. To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.
Testex Spring Micrometer Analog Dial Thickness Gage
| Order Code | Description | Units | Certified | ||
|---|---|---|---|---|---|
 | RTMMIL | Testex Micrometer Dial Thickness Gage | Mils | No | $265.00 |
| RTMMILCERT | Testex Micrometer Dial Thickness Gage — Certified | Mils | Yes | $300.00 | |
| RTMMIC | Testex Micrometer Dial Thickness Gage | Microns | No | $265.00 | |
| RTMMICCERT | Testex Micrometer Dial Thickness Gage — Certified | Microns | Yes | $300.00 |
Testex Tape
| Testex Tape Coarse Grades | |||||
|---|---|---|---|---|---|
| Coarse Grade | Range | Measurement Tools | 6-Pack | 60-Pack | |
| Coarse Minus $38.00 | 0.5 to 1.0 mils 12 to 25 µm | Testex Digital Micrometer Testex Analog Micrometer PosiTector RTR H | ||
| Coarse $38.00 | 0.8 to 2.0 mils 20 to 50 µm | $228.00 | $2,280.00 | ||
| X-Coarse $38.00 | 1.5 to 4.5 mils 38 to 115 µm | $228.00 | $2,280.00 | ||
| X-Coarse Plus $38.00 | 4.0 to 6.0 mils 100 to 150 µm | $228.00 | $2,280.00 | ||
| Optical Grade Coarse $50.00 | 0.8 to 2.5 mils 20 to 64 µm | PosiTector RTR 3D | |||
| Optical Grade X-Coarse $50.00 | 1.5 to 4.5 mils 38 to 115 µm | ||||
 | Legacy Coarse $38.00 | 0.8 to 2.5 mils 20 to 64 µm | Testex Digital Micrometer Testex Analog Micrometer PosiTector RTR H | ||
| Legacy X-Coarse $38.00 | 1.5 to 4.5 mils 38 to 115 µm | ||||
| Legacy X-Coarse Plus $38.00 | 4.6 to 5.0 mils 116 to 127 µm | ||||
| Weight | 1 lbs |
|---|---|
| Dimensions | 9 × 5 × 2 in |
| Measurement Type | Mils, Mils – Certified, Microns, Microns – Certified |
You may also like…
- ASTM D4417, Surface Characteristics Accessories, Surface Profile
Testex Replica Tape | Press-O-Film
Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.
1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.
2.When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface.
3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile.One box of Testex contains tape for 50 measurements.
SKU: n/a
Related products
- ASTM D4417-B, BS 3900-C5, BS EN ISO 2808, IMO MSC.215(82), ISO 2808, JIS K 5600-1-7, Surface Characteristics, Surface Profile
Surface Profile And Coating Thickness Gauge – SP1560
ASTM D4417-B, BS 3900-C5, BS EN ISO 2808, IMO MSC.215(82), ISO 2808, JIS K 5600-1-7, Surface Characteristics, Surface ProfileSurface Profile And Coating Thickness Gauge – SP1560
The TQC Surface Profile & Coating Thickness gauge is a combination gauge. that can be equipped with two different tips, one for surface roughness and another for coating thickness.
Supplied with a sharp tungsten carbide replaceable tip for surface profile measurement, a hardened round tip for coating thickness measurement, a glass plate for zero calibration and a leather carry pouch that fits all items.
SKU: SP1560 - Pictorial Surface Standards, Surface Cleanliness/Preperations
The Paint Inspector’s Field Guide Version 2 – LD3085
Pictorial Surface Standards, Surface Cleanliness/PreperationsThe Paint Inspector’s Field Guide Version 2 – LD3085
The Paint Inspector’s Field Guide
Industrial Physics offers instruments for testing and analyzing paint, coatings and general surface treatments used across industries ranging from transportation infrastructure to marine, beverage and canning and automotive.
The Paint Inspector’s Field Guide from Industrial Physics is a must have tool for any professional concerned with protective coatings that prevent corrosion.
The inspection of protective coating systems for corrosion control involves a wide range of test methods and techniques. The Paint Inspector’s Field Guide explores the various inspection methods available and describes the basic fundamentals of protective coating inspection to support those working in the field.
Authored by Lee Wilson, a highly qualified and well respected inspector with many years of field experience, the Guide provides an overview of the procedures and tools used by inspectors to perform specification review, surface preparation, application and final reporting.
In addition, the Paint Inspector’s Field Guide comprises a wide range of inspection and application notes, making it easy to solve problems which are commonly encountered in the field. The following guide provides support in the form of detailed textual analysis and visual references of inspection techniques and standards, as well as commonly encountered defects.
SKU: LD3085 - Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000
Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
Adhesion, ASTM D3359, ASTM D4417, ASTM D4417-B, BS 7079-B4, IMO MSC.215(82), ISO 2409, ISO 2808-3, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-01, ISO 8503-02, Optical Inspection Tools, PH / Conductivity, Salt/Chloride Testing, Surface Characteristics, Surface Cleanliness/Preperations, Surface Profile, US Navy NSI 009-32, US Navy PPI 63101-000Pretreatment Test Kit (PTK) Basic or Full Kit – SP7315 or SP7316
The Pretreatment Test Kit is especially composed to control all relevant parameters during the pretreatment of steel prior to painting. The PTK is available as BASIC KIT and FULL KIT.
See Datasheet for Basic and Full kit comparisons
SKU: n/a
