Dark Light
, ,

Testex Replica Tape | Press-O-Film


Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.

1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.
2.When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface.
3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile.

One box of Testex contains tape for 50 measurements.

Testex Replica Tape – Press O Film

Testex Replica Tape Press-O-Film User Manual

Xtra Info

 

ORDERING INFORMATION

Coarse Testex

Type: Testex-tape COARSE range: 0.8 to 2.5 mils / 20 to 64 µm

X-Coarse Testex

Type: Testex-tape X-COARSE range:1.5 to 4.5 mils / 38 to 115 µm

X-Coarse Plus Unmetalized

Type: Testex-tape X-coarse Plus, range 4.6 to 5.0 mils / 116 to 127 µm

    Weight0.5 lbs
    Dimensions1 × 2 × 1 in
    Type

    Coarse, X-Coarse, X-Coarse Plus – Unmetallic