Showing all 41 results
The byko-test gauge offers a unique solution to monitor environmental conditions by measuring Film thickness Fe/NFe, Dew Point, Air Temperature, and Relative Humidity all in one.
There is also a dry film thickness only version available, the byko-test Lite.
The EXTECH Psychrometer with IR Thermometer has a built-in InfraRed Thermometer for non-contact temperature measurement to 932F (500C), IR Thermometer: 30:1 distance to target ratio, Type K Thermometer for contact temperature measurement to 2501F (1372C), Large triple LCD backlit display, 2% RH accuracy, Min/Max, Data hold and Auto power off functions, Built-in USB port, Includes Windows compatible software with USB cable, Type K bead wire probe, carrying case and 9V battery.
The CureView Gradient Oven is a flexible oven that allows the user to heat up test panels on a glass bed to a variety of temperature profiles. CureView Gradient Oven 230/110 VAC CureView Gradient Oven 230/110 VAC
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mm
The TQC Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just pressing the instrument against the concrete surface.
Non-destructive instrument for measuring moisture levels in concrete and sand-cement floors. Measurements or up to a few centimeters deep can be taken without damaging the surface. Ideal when laying parquet floors, floor coverings or floor coatings. Versatile, precise and easy to use, the CME4 allows the user to make multiple tests over a large area in the shortest possible time.
The PosiTector 6000 Coating Thickness Gauge is available in 2 models: the PosiTector 6000 Standard and Advanced. There are many probes to choose from either with a PosiTector 6000 gauge body or you may purchase a probe separately. See the PosiTector 6000 descriptions and downloadable pdf brochures in the description area below for more info.
The TQC Thermo hygrometer is a simple hand-held digital thermo/hygrometer. Temperature and air humidity are displayed simultaneously. Equipped with MIN/MAX memory, °C/°F selection, HOLD function and dewpoint indication.
The TQC Thermo hygrometer operates 10.000(!) hours on 3 batteries type AAA and switches itself off after 10 min.
ATTENTION HUMIDITY SENSOR The Humidity Sensors housed in these products are susceptible to contamination from pollutants such as solvents and exposure to saturated air and therefore are not covered under the 2 year warranty. Furthermore it is expected that the sensor’s readings will drift by up to 0.5% per year.
Sato SK-L200THII Alpha datalogger+SK-LTHII-1 probe – HM8020
Extremely compact data logger for recording temperature and air humidity. Complete with attached combiprobe (T/RV). A wire-combiprobe is optional. Directly programmable from the keypad or PC. Complete with attached combiprobe, USB cable and evaluation software.
The TQC DewCheck 4 – Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. This easy to use and robust dewmeter conforms to ISO 8502-4 & ASTM D3276-07 and measures the relative humidity (%RH), ambient temperature (Ta) and surface temperature (Ts) and calculates the dewpoint temperature (Td) and the difference between the dewpoint temperature and the surface temperature (ÄT). The difference between the surface temperature and dewpoint temperature indicates the optimal climate conditions for painting. All parameters can be stored in the dew meter’s memory, tagged with a date and time.
For communication between DewCheck 4 dewmeter and a PC the DewCheck dew meter USB cable is standard supplied. To analyze the data the DewCheck 4 comes with the special Ideal Finish Analysis software. This software is the most advanced temperature and humidity monitoring software package for Dew-point Meters available today. It offers user friendly reporting functions for standard production work as well as advanced calculations for in depth analysis of the climate parameters prior to coating. Detailed graphic representations and custom reports help to make the right decisions.
Pocket sized infrared thermometer with laser pointer to measure surface temperature without making contact. The laser pointer identifies the target area easily. An illuminated display allows working in dark or poorly lit environments.
Fast and simple operation, just point and shoot and the surface temperature is shown immediately. Typical applications are with surfaces that are hard to reach, moving objects or electrical parts.
A user-friendly TQC Infrared Thermometer Standard designed to measure surface temperature without making contact under harsh industrial circumstances. The laser pointer identifies the target area while rubber parts on the housing protect the instrument against mechanical damage. An illuminated display allows working in dark or poorly lit environments.
TQC Precision Thermometer Temperature Range: -49.9 to +149.9°CResolution: 0.1°C (°F alterable)Accuracy: ±0.5°C between -49.9 to 99.9°C, ±1°C above 100°CBattery: MN2400 (AAA)
Battery Lifetime: 8000 hours
Display: 15mm LCD
Dimensions: 19 x 52 x 155mm
Weight: 76 gram
The TQC Precision Thermometer is a handy pocket size thermometer with foldable stainless steel probe. Suitable for measurements in liquids and semisolids. Large clear display, ergonomic design and easy to clean. The instrument is equipped with an ON/OFF, MAX/MIN switch and can easily be set to Fahrenheit if necessary.
Bacharach type sling Psychrometer for indicating percent relative humidity on the basis of the wet bulb-dry bulb thermometer principle. The plastic case of the instrument is equipped with conversion scale for calculating the percent relative humidity.
A handy pocket size Thermapen thermometer with foldable stainless steel probe. Two versions of the Thermapen are available, one with a ribbon surface probe, one with a penetration probe. The ribbon surface probe is ideal for measuring the temperature of a variety of flat surfaces, i.e. hotplates, pipework, bearings, etc. The strong, versatile penetration probe with a pointed, general purpose tip is suitable for liquid and semi-solid insertion.
Profiling an industrial powder coating oven starts here with the CurveX 4 Oven Logger Kit. It contains all necessary items, just add the desired magnetic or clamp-type probes to make the oven logger kit complete.
The CurveX 3 Basic is an oven recorder designed for everyday use in powder coating lines.
It’s a 4-channel temperature datalogger built in a sturdy machined aluminium case that fulfils the basic needs for quality control in powder coating applications. Its ease of use and affordable price level makes it the ideal job-coaters instrument.
To use a CurveX 3 Basic to the fullest an insulation box, heat absorber/bracket and probes are necessary. All CurveX insulation boxes and CurveX probes, and the single heat absorber / bracket can be used with the CurveX 3 Basic. See the accessory list
• Operate through only 3 large buttons
• Meaningful feedback of multi coloured LED’s
• Factory calibrated for immediate use, calibration certificate included
• Downloads data through a standard USB port
• Rechargeable battery pack through USB connector
• Large memory of max. 160.000 readings
• Memory for 10 different batches, automatically overwrites the oldest results
• Programmable “paint type” memory for immediate “pass / fail” result
• Flat design, only 16 mm, for use in low clearance ovens
• Compatible with Ideal Finish Analysis software
TQC DewCheck 4 Docking Station Series 2Delivery includes:- Magnetic surface temperature probe- Ideal Finish Analysis evaluation software- USB-cable- Allen key 2.5 mm.
Ecoscan Cond 6+ Conductivity gauge
Powerful portable conductivity gauge with large measuring range. Equipped with cable electrode and integrated temperature probe for automatic temperature compensation. The high accuracy and robust protective casing make this gauge ideal for use in the field and laboratory.
Set of (25 pieces) Self-adhesive attachment pads (T=250°C/482°F)
Exposed junction wire probes for measuring the air and/or surface temperature. Supplied as set of 6 pieces in plastic box, complete with 25 self adhesive pads.
Thermax® Irreversible temperature indicators available over a range of -17°C to +1270°C (+1°F to +2318°F) which are used in numerous applications such as Food, Medical, Automotive, Aerospace and Engineering.
CALL FOR PRICING
Wood moisture meter in pocket size format. The Mini LIGNO classic+ is the succession model of the mini LIGNO X. With the mini LIGNO classic+ you have the option between four wooden groups, 16 single species of wood and an reference scale. Because of the wide range of options, the Classic+ is suited particularly for wood buyers, wood traders, wood processors, saw companies and for the dry masters.
High precision destructive S2000 measuring system for detecting moisture in concrete, sand cement and other brick material. The water present in the sample reacts (chemically) with calcium carbide. This produces pressure in the vessel, which is proportional to the residual moisture content. Insensitive to external influences, always displays the right value. Complete set in carrying case with balance, pressure cylinder, calcium carbide and cleaning tools.
The TQC Oven Logger Temperature Probe Identification KIT is available as a series tags numbered 1 to 6. Suitable for any industrial powder coating oven also at high temperatures.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
