Main Menu
Thickness Testing
Showing all 24 results
- ASTM D7091, Dewpoint, Dry Film Thickness Gauges, SSPC PA-2, Temperature, Temperature and Climatic Testing, Thickness Testing
Byko-Test Coating Thickness Gauge
ASTM D7091, Dewpoint, Dry Film Thickness Gauges, SSPC PA-2, Temperature, Temperature and Climatic Testing, Thickness TestingByko-Test Coating Thickness Gauge
The byko-test gauge offers a unique solution to monitor environmental conditions by measuring Film thickness Fe/NFe, Dew Point, Air Temperature, and Relative Humidity all in one.
There is also a dry film thickness only version available, the byko-test Lite.
SKU: DF-B3790 - Climate Testing, Density, Dewpoint, Dry Film Thickness, Dry Film Thickness Gauges, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Coating Thickness Gauge & Probes
Climate Testing, Density, Dewpoint, Dry Film Thickness, Dry Film Thickness Gauges, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Coating Thickness Gauge & Probes
PosiTector 6000 Coating Thickness Gauge and Probes: Gauge Body comes in Standard and Advanced. Order probe with or without a gauge body.
SKU: n/a - Contactless Film Thickness, Dry Film Thickness, Dry Film Thickness Gauges, Paint Thickness Gauge, Powder Coating, Thickness Testing, Wet Film Thickness, Wet Film Thickness
Coatmaster Flex Paint Thickness Gauge – LD5864
Contactless Film Thickness, Dry Film Thickness, Dry Film Thickness Gauges, Paint Thickness Gauge, Powder Coating, Thickness Testing, Wet Film Thickness, Wet Film ThicknessCoatmaster Flex Paint Thickness Gauge – LD5864
CALL FOR PRICING AND AVAILABILITY
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.
SKU: LD5864 - Dry Film Thickness, Dry Film Thickness Gauges, Thickness Testing
Byko-Test Lite Coating Thickness Gauge
Dry Film Thickness, Dry Film Thickness Gauges, Thickness TestingByko-Test Lite Coating Thickness Gauge
The byko-test lite is a Ferrous/Non-Ferrous coating thickness gauge with a compact design for easy handling. The gauge body is made from impact resistant material and it’s easy to use. The operate buttons are large for users wearing gloves. It automatically recognizes the substrate and switches to the correct setting. An automatic switch-off ensures long battery life. The large color display with a backlight is readable in high and low lighting conditions. The display will automatically rotate to the correct viewing position. In the statistic mode average, minimum, maximum, and standard deviation are displayed. The measurements are automatically stored and downloadable to a PC with the optional USB cable and software.
SKU: DF-B3791 - Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1000
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - ASTM D4417, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Material Thickness, Smoothness Testing, Surface Profile, Thickness Testing, ГОСТ Р 51694
Foil Thickness Gauge FTG2000 – SP1570
ASTM D4417, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Material Thickness, Smoothness Testing, Surface Profile, Thickness Testing, ГОСТ Р 51694Foil Thickness Gauge FTG2000 – SP1570
The TQC Film thickness gauge is a high precision film and foil thickness gauge, especially developed for measuring so-called “replica tapes” as Testex®, used mainly to measure the surface profile.
SKU: SP1570 - Dry Film Thickness, Dry Film Thickness Gauges, Thickness Testing
PosiPen® Magnetic Pull-Off Coating Thickness Gage
Dry Film Thickness, Dry Film Thickness Gauges, Thickness TestingPosiPen® Magnetic Pull-Off Coating Thickness Gage
PosiPen® has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces.
SKU: PEN - Coating Thickness Accessories, Dry Film Thickness Gauges, Thickness Testing
NON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Coating Thickness Accessories, Dry Film Thickness Gauges, Thickness TestingNON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.SKU: STDSHIMS - Coating Thickness Accessories, Dry Film Thickness Gauges, Thickness Testing
Certified Plastic Shims
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Each shim is packaged in a protective sleeve
- Certificate of Calibration showing traceability to PTB is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
SKU: n/a - Destructive Dry Film Thickness Gage, DIN 50986, ISO 2808, Thickness Testing
Cutting Tools for SuperPig III Destructive Paint Inspection Gauge
Destructive Dry Film Thickness Gage, DIN 50986, ISO 2808, Thickness TestingCutting Tools for SuperPig III Destructive Paint Inspection Gauge
Cutting Tools for SuperPig Destructive Paint Inspection Gauge
SP1111 – Cutting tool 1 for Super Pig 20-1800µm
SP1112 – Cutting tool 2 for Super Pig, 10-900µm
SP1113 – Cutting tool 3 for Super Pig, 5-450µm
SP1114 – Cutting tool 4 for Super Pig, 2-180µmSKU: n/a - Material Thickness, Thickness Testing
Ultrasonic Wall Thickness Gauge Pro – LD7016
Ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminum, titanium, plastics, ceramics, glass and plastics. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.
SKU: LD7016 - ISO 2808, JIS Z2371, Paint Thickness Gauge, Thickness Testing, Wet Film Thickness, Wet Film Thickness, ГОСТ Р 51694
Wet Film Thickness Gauge Stainless Steel
ISO 2808, JIS Z2371, Paint Thickness Gauge, Thickness Testing, Wet Film Thickness, Wet Film Thickness, ГОСТ Р 51694Wet Film Thickness Gauge Stainless Steel
The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.
SKU: n/a - ISO 2808, JIS Z2371, Paint Thickness Gauge, Thickness Testing, Wet Film Thickness, Wet Film Thickness, ГОСТ Р 51694
Wet Film Thickness Wheel
ISO 2808, JIS Z2371, Paint Thickness Gauge, Thickness Testing, Wet Film Thickness, Wet Film Thickness, ГОСТ Р 51694Wet Film Thickness Wheel
This Wet Film Thickness Wheel is specially developed for use on wet lacquers, paint and coil coated surfaces. Equipped with a precision roller-bearing for smooth rolling over the surface . The wheel has three rims, the inner rim being eccentric to the two outer rims. The outer rings are notched for a firm grip on the surface to prevent slipping. Made of stainless steel with an aluminum grip.
SKU: n/a - Coating Thickness Accessories, Dry Film Thickness Gauges, PosiTector® 6000, Thickness Testing
Certified Coated Metal Plates & Certified Polystyrene Blocks
Coating Thickness Accessories, Dry Film Thickness Gauges, PosiTector® 6000, Thickness TestingCertified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.SKU: n/a - Dry Film Thickness Gauges, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories, Thickness Testing
PosiTector SPG Certified Standards
Dry Film Thickness Gauges, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories, Thickness TestingPosiTector SPG Certified Standards
The PosiTector SPG Certified Standards are traceable height standards mounted to a metal plate with calibration guide for recalibrating depth micrometer probes.
SKU: STDSPG