Dark Light
, , , , , ,

Coatmaster Flex Paint Thickness Gauge – LD5865


Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.

$11,988.00

Coatmaster Flex

Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.

Documents

Datasheet (pdf)
Manual (pdf)

Coatmaster Flex Description

Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints. The portable gauge operates contactless and non-destructive without dangerous emissions. Coatmaster Flex is suitable for coating metal, paper, rubber, ceramics, glass, plastic and wood surfaces.

Avoid rework and rejects: Detect and correct deviations early in the process.

Save material: Reduce your material consumption by up to 30%. This saves money and protects the environment.

Ensure quality: Produce coatings with high accuracy and set new quality standards.

Features:

  • Large measuring distance tolerance (2-15cm*)
  • Large tilt tolerance (70°*)
  • Also suitable for thicker layer thicknesses
  • Suitable for measuring moving parts
  • Suitable for dry and wet film coatings
  • Measurement data saved in the cloud

 

Coatmaster Flex Technical Data

Cured powder / dried paints 1 – 1000 μm
Wet paints before drying  1 – 400 μm
Powder coatings before curing 1 – 400 μm
Measuring time from 20 ms
Distance tolerance* 2 – 15 cm
Tilt tolerance 1 ± 70°
Measurement on moving parts yes
Relative standard deviation** < 1 %
Measures coatings of any color (incl. white) yes
Real-time data access via ERP and browser yes
Weight (without battery) 1.3 kg
Dimensions 374 x 91 x 203 mm

* Depending on coating and substrate material
** 60 μm powder coating before curing on aluminum, 5 cm working distance

 

Coatmaster Flex Technical data: Substrate Metal

Powder coating

10 – 300 µm

Wet coating

10 – 300 µm

Cured coating

10 – 500 µm

Measuring time

0.25 s

Distance tolerance

2 – 15 cm

Tilt tolerance

± 70°

Measurement on moving parts

yes

Relative standard deviation

< 1 %

Waiting time between two measurements

2 s

Comments:

All data are valid for a typical system of coating and substrate.

Exact limits always depend on physical properties of the coating material.

 

Scope of supply:

  • Coatmaster Flex
  • Rechargeable battery 18V (2x)
  • Battery charger
  • Transport Case

If you’re looking for an easy, accurate and reliable way to measure powder coating thickness every time, then the Coatmaster Flex Paint Thickness Gauge is the perfect choice for you. This compact and lightweight device provides fast readings in both mils (thousandths of an inch) and microns (one millionth of a meter) with a resolution down to 0.00005”. It can also be used on curves, edges and other hard-to-reach spots that traditional gauges can’t. Plus, it’s powered by rechargeable batteries which provide up to 10 hours of operation before needing a recharge. Get the best solution for your needs with the Coatmaster Flex Paint Thickness Gauge!

Weight 2.867 lbs
Dimensions 14.73 × 3.58268 × 7.99213 in

Cured powder / dried paints: 1 – 1000 μm

Wet paints before drying:  1 – 400 μm

Powder coatings before curing: 1 – 400 μm

Measuring time: from 20 ms

Distance tolerance*: 2 – 15 cm

Tilt tolerance: 1 ± 70°

Measurement on moving parts: yes

Relative standard deviation**:  1 %

Measures coatings of any color (incl. white): yes

Real-time data access via ERP and browser: yes

Weight (without battery): 1.3 kg

Dimensions: 374 x 91 x 203 mm