No products in the cart.
Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
NON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.
$20.00
Non-Certified Plastic Shims
Provide a quick operational check of the instrument by allowing the user to perform practice measurements
Can be used to protect the probe when measuring on tacky, rough or hot surfaces
Labeled in both Metric and Imperial units
Non-certified plastic shims
Available as a set of 5 (below):
Approximate Thickness | Color | Accuracy
25 μm (1 mil) | Orange | ± 20%
50 μm (2 mil) | Red | ± 10%
125 μm (5 mil) | Blue | ± 5%
250 μm (10 mil) | Brown | ± 5%
500 μm (20 mil) | Yellow | ± 5%
Note: While DeFelsko inspects non-certified plastic shims to ensure they are within the nominal stated accuracy, they are not traceable to any national or international standard.
| Weight | .05 lbs |
|---|---|
| Dimensions | 2 × 2 × 1 in |
Related products
- Accessory Products, Coating Thickness Accessories, PosiTector 6000 Accessories
Certified Coated Metal Plates & Certified Polystyrene Blocks
Accessory Products, Coating Thickness Accessories, PosiTector 6000 AccessoriesCertified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.SKU: n/a - Material Thickness, Thickness Testing
Ultrasonic Wall Thickness Gauge Pro – LD7016
Ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminum, titanium, plastics, ceramics, glass and plastics. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.
SKU: LD7016 - ISO 2808, JIS Z2371, Paint Thickness Gauge, Thickness Testing, Wet Film Thickness, WFT Wet Film Thickness, ГОСТ Р 51694
Wet Film Thickness Gauge Stainless Steel
ISO 2808, JIS Z2371, Paint Thickness Gauge, Thickness Testing, Wet Film Thickness, WFT Wet Film Thickness, ГОСТ Р 51694Wet Film Thickness Gauge Stainless Steel
The TQC Wet Film Thickness Gauge WG is a hexagonal/octagonal precision measuring comb made of heavy stainless steel. The high-grade stainless steel will not be affected by acid or base elements. Models available for several different applications.
SKU: n/a - Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1100 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1100
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - Accessory Products, ASTM D1084, ISO 11998, Paint Charts and Panels, Scratch Testing, Thickness Testing, Wet Abrasion Scrub | Washability Test
TQC Test charts checkered, A3, sealed, 250 pcs – VF2354
Accessory Products, ASTM D1084, ISO 11998, Paint Charts and Panels, Scratch Testing, Thickness Testing, Wet Abrasion Scrub | Washability TestTQC Test charts checkered, A3, sealed, 250 pcs – VF2354
Test Charts
297x420mm A3 Black / White Checkered
Supplied: 250 pieces, Sealed.
Certificate Included
SKU: VF2354
