No products in the cart.
DeFelsko®
Showing 1–48 of 54 results
- Adhesion
PosiTest AT Pull-off Adhesion Tester – Manual or Automatic
The PosiTest AT Pull-off Adhesion Tester uses hydraulic pressure to apply perpendicular force and debond an aluminum pull stub from the coating surface. Measure the adhesive and cohesive strength of coatings and coating systems in the laboratory, shop or field using this self-aligning hydraulic tensile adhesion testing kit.
SKU: n/a - Accessory Products, Adhesion Accessories
PosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Accessory Products, Adhesion AccessoriesPosiTest® AT Verifier – Adhesion Tester Accuracy Verification Kit
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The PosiTest® AT Verifier and included documents allow the user to certify the accuracy of PosiTest® Adhesion Testers.
- High precision load cell and handheld smart sensor indicator
- Peak hold and real time reading display
- Bonded foil strain gages are hermetically sealed for protection against industrial environments
- Ready to use with all PosiTest® Pull-Off Adhesion Testers
- Ideal for field or laboratory use
- Fitted with a permanent steel 20 mm loading fixture (dolly). A conversion factor is used to verify other sizes
SKU: ATVERIFY - Climate Testing, Coating Thickness Gages, Density, Dewpoint, DFT Dry Film Thickness Gauges, Dry Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Standard/Advanced Body | DeFelsko
Climate Testing, Coating Thickness Gages, Density, Dewpoint, DFT Dry Film Thickness Gauges, Dry Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Standard/Advanced Body | DeFelsko
PosiTector 6000 Coating Thickness Gauge and Probes: Gauge Body comes in Standard and Advanced. Order probe with or without a gauge body. Scroll down to the ordering table to easily add items to your cart.
SKU: n/a - DFT Dry Film Thickness Gauges, Dry Film Thickness, Powder Coating
DeFelsko PosiTest DFT Coating Thickness Gage
DFT Dry Film Thickness Gauges, Dry Film Thickness, Powder CoatingDeFelsko PosiTest DFT Coating Thickness Gage
The PosiTest DFT Coating Thickness Gage measures coatings on ALL metals. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments.SKU: n/a - AS3894.1, ASTM D4787, ASTM D5162, ASTM D6747, ASTM D7953, ASTM G62, ISO 29601, NACE SP0188, Pinhole & Porosity Holiday Detectors, SP0274, SP0490
PosiTest HHD High Voltage Holiday Detector
AS3894.1, ASTM D4787, ASTM D5162, ASTM D6747, ASTM D7953, ASTM G62, ISO 29601, NACE SP0188, Pinhole & Porosity Holiday Detectors, SP0274, SP0490PosiTest HHD High Voltage Holiday Detector
The PosiTector HHD High Voltage Holiday Detector detects holidays, porosity, pinholes, leaks, and other discontinuities in coatings, linings, and membranes using pulse DC
-Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue
-Regulated pulse DC voltage output that won’t change under load— ±5% voltage accuracy
-Voltage calculator feature—choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage
-Extensive electrode options—choose from a wide range of rolling spring and flat wire brush electrodes or use electrodes from other manufacturers with optional adaptors—custom sizes available upon request
Long Form Certificate of Calibration included with each instrumentConforms to ASTM D4787/D5162/D6747/D7953/G62, ISO 29601, NACE SP0188/SP0274/SP0490, AS3894.1
SKU: n/a - Climate Testing, Dewpoint
Dew Point Meter Logger PosiTector DPM and DPM L+
Magnetic probes attach to steel structures for monitoring climatic conditions. Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, difference between surface and dew point temperatures, and wet bulb temperature.
- Fast response, precision sensors provide accurate, repeatable readings
- Environmentally sealed enclosure – weatherproof, dustproof, and shockproof—meets or exceeds IP65
- Internal memory storage of 10,000 datasets (60,000 readings)
Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32SKU: DPMLPLUS - DFT Dry Film Thickness Gauges, Dry Film Thickness, Thickness Testing
PosiPen® Magnetic Pull-Off Coating Thickness Gage
DFT Dry Film Thickness Gauges, Dry Film Thickness, Thickness TestingPosiPen® Magnetic Pull-Off Coating Thickness Gage
PosiPen® has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces.
SKU: PEN - Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
NON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness TestingNON-CERTIFIED SHIM SET 1,2,5,10&20 MIL – STDSHIMS
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.SKU: STDSHIMS - Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
DeFelsko Certified Plastic Shims
Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness TestingDeFelsko Certified Plastic Shims
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Each shim is packaged in a protective sleeve
- Certificate of Calibration showing traceability to PTB is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
SKU: n/a - PosiTector 6000 Accessories, Surface Characteristics, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories
Testex Digital Micrometer Kit
PosiTector 6000 Accessories, Surface Characteristics, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage AccessoriesTestex Digital Micrometer Kit
Testex Digital Micrometer Thickness Gage Kit includes everything required to measure the surface profile using replica tape. Includes digital micrometer, three cartons of replica tape.
SKU: RTKIT - Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage Accessories
High Accuracy Burnishing Tool
Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile, Surface Profile Gage AccessoriesHigh Accuracy Burnishing Tool
Burnishing tool includes a built-in spring mechanism ensuring that consistent force is used, regardless of how hard the tool is pressed against the surface
SKU: RTBURNISHHA - Accessory Products, Salt/Chloride Testing
Flexible Magnetic Ring for PosiPatch™
The innovative PosiPatch™ (sold separately) attaches to steel surfaces using a unique magnetic ring. Like the Standard Magnetic Ring, the Flexible Magnetic ring leaves no messy adhesive residue to clean. Intended for pipes and other tight diameters, it allows the PosiPatch™ to form a tight, leak-free seal on inside and outside diameters greater than 10 cm (4 in.).*
The Standard Magnetic Ring continues to be included in all PosiPatch™ Kits and is the first choice for flat surfaces and curved surfaces with diameters greater than 100 cm (40 in.).
*Flexible Patch Minimum ID diameter is 12 cm (4.5 in.)
SKU: SSTRINGF - Accessory Products, Pinhole & Porosity Holiday Detector Accessories
Electrode Adaptors for PosiTest HHD
Accessory Products, Pinhole & Porosity Holiday Detector AccessoriesElectrode Adaptors for PosiTest HHD
Electrode Adaptors for PosiTest HHD connect to spring and brush electrodes from other manufacturers — choose between PCWI, Tinker & Rasor, and 266 & 280 adaptors (adaptor not required for SPY electrodes)
SKU: n/a - Adhesion Accessories
Adhesive Kit
ResinLab EP11HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
Approximate Epoxy Yield*
- 20 mm: ~100 dollies
- 50 mm: ~16 dollies
- 14 mm: ~200 dollies
- 10 mm: ~400 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste
SKU: ATADHESIVEKIT - Accessory Products, Coating Thickness Accessories, PosiTector 6000 Accessories
Certified Coated Metal Plates & Certified Polystyrene Blocks
Accessory Products, Coating Thickness Accessories, PosiTector 6000 AccessoriesCertified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.SKU: n/a - PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile
Replica Tape Holder
PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface ProfileReplica Tape Holder
For Replica Tape Holder best results and to minimize the migration of adhesive from the tape to the probes measurement system, DeFelsko recommends using the supplied tape holder. For PosiTector RTR Replica Tape Holder
SKU: RTRTAPEHLDR - Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface Profile
Cleaning Cards for PosiTector RTR (20-Pack)
Accessory Products, PosiTector 6000 Accessories, Surface Characteristics Accessories, Surface ProfileCleaning Cards for PosiTector RTR (20-Pack)
Cleaning Cards for PosiTector RTR are pre-moistened with isopropyl alcohol to clean residual adhesive and debris from the anvils to insure an accurate test.
SKU: RTRCLEANCARD
