Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
$185.00 – $350.00
Select the Standard that most closely matches the measuring range of your gage.
| Order Code | Ideal For | Approximate Thickness | Coating/Substrate | Accuracy | ||||
|---|---|---|---|---|---|---|---|---|
| Plate 1 | Plate 2 | Plate 3 | Plate 4 | |||||
| S1 | PosiTector® 6000 F, FS, FRS, FN, FNS, FNRS, FXS*, FNDS, PosiTest F & FM |
0 | 75 μm 3 mils |
250 μm 10 mils |
1500 μm 60 mils |
Epoxy on Steel (Ferrous) |
± 0.43 μm ± 0.017 mil |
|
| S2 | PosiTector® 6000 F0S, F45S, F90S, F90ES PosiTest DFT Ferrous & Combo |
0 | 75 μm 3 mils |
250 μm 10 mils |
1000 μm 40 mils |
|||
| S3 | PosiTest® G & GM PosiPen® A, B & C |
0 | 15 μm 0.6 mils |
40 μm 1.6 mils |
100 μm 4 mils |
|||
| S4 | PosiTector® 6000 FXS* | 0 | 75 μm 3 mils |
1000 μm 40 mils |
1900 μm 75 mils |
|||
| A1 | PosiTector® 6000 N, NS, NRS, FN, FNS, FNRS, FNDS | 0 | 75 μm 3 mils |
250 μm 10 mils |
1500 μm 60 mils |
Epoxy on Aluminum (Non-Ferrous) |
± 0.43 μm ± 0.017 mil |
|
| A2 | PosiTector® 6000 NAS, N0S, N45S, N90S PosiTest DFT Combo |
0 | 75 μm 3 mils |
250 μm 10 mils |
500 μm 20 mils |
|||
| A3 | PosiTector® 100B, 200, 200B | 75 μm 3 mils |
125 μm 5 mils |
250 μm 10 mils |
500 μm 20 mils |
|||
Select the Standard that most closely matches the measuring range of your gage.
| Order Code | Ideal For | Approximate Thickness | Accuracy | ||||
|---|---|---|---|---|---|---|---|
| Plate 1 | Plate 2 | Plate 3 | Plate 4 | ||||
| P1 | PosiTector® 6000 F, FS, FRS, FN, FNS, FNRS, FXS*, FNDS, PosiTest® F & FM |
0 | 75 μm 3 mils |
250 μm 10 mils |
1500 μm 60 mils |
± 0.43 μm ± 0.017 mil |
|
| P2 | PosiTector® 6000 F0S, F45S, F90S, F90ES PosiTest® DFT Ferrous & Combo |
0 | 75 μm 3 mils |
250 μm 10 mils |
1000 μm 40 mils |
||
| P3 | PosiTest® G & GM PosiPen® A, B & C |
0 | 15 μm 0.6 mils |
40 μm 1.6 mils |
100 μm 4 mils |
||
| P4 | PosiTector® 6000 FXS* | 0 | 75 μm 3 mils |
1000 μm 40 mils |
1900 μm 75 mils |
||
| P5 | PosiTector® 6000 N, NS, NRS, FN, FNS, FNRS, FNDS | 0 | 75 μm 3 mils |
250 μm 10 mils |
1500 μm 60 mils |
||
| P6 | PosiTector® 6000 NAS, N0S, N45S, N90S PosiTest® DFT Combo |
0 | 75 μm 3 mils |
250 μm 10 mils |
500 μm 20 mils |
||
| P7 | PosiTector® 100B, 200, 200B | 75 μm 3 mils |
125 μm 5 mils |
250 μm 10 mils |
500 μm 20 mils |
||
| P8 | PosiTector® 100B, 200, 200B | 75 μm 3 mils |
125 μm 5 mils |
250 μm 10 mils |
500 μm 20 mils |
||
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
P1-P7 Blocks: 38 x 70 mm (1.5″ x 2.75″) P8 Blocks: 76 x 76 mm (3.0″ x 3.0″)
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| Type | Certified Coated Metal Plates, Certified Polystyrene Blocks |
| Model | STDS1, STDS2, STDS3, STDS4, STDA1, STDA2, STDA3, STDP1, STDP2, STDP3, STDP4, STDP5, STDP6, STDP7, STDP8 |
Ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminum, titanium, plastics, ceramics, glass and plastics. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.
Coatmaster Flex measures coating thickness immediately after application. Use Coatmaster Flex for measuring wet and cured/dried powders and paints.
PosiPen® has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces.
Ideal for checking the accuracy and operation of adhesion testers and is an important component in fulfilling both ISO and in-house quality control requirements.
The PosiTest® AT Verifier and included documents allow the user to certify the accuracy of PosiTest® Adhesion Testers.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
