Used to check the operation of PosiTector RTR 3D peak density measurement (for use with the PosiTector RTR 3D only).
$25.00
Used to check the operation of PosiTector RTR 3D peak density measurement (for use with the PosiTector RTR 3D only).
One check tape is included with each RTR 3D probe.
| Weight | .3 lbs |
|---|---|
| Dimensions | 3 × 4 × 2 in |
| brands | DeFelsko |
Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.
1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.
2.When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface.
3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile.
One box of Testex contains tape for 50 measurements.
Pre-moistened with isopropyl alcohol to clean residual adhesive and debris from the anvils helping to insure an accurate test.
Every PosiTector RTR ships with (5) cleaning cards. Additional cards are available (20 cards per pack).
Optical Grade XC Testex Replica Tape available — provides higher quality SDF surface data files than conventional replica tape (for use with PosiTector RTR 3D models).
Each roll of Testex Tape includes 50 pieces (Impressions).
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
