No products in the cart.
Adhesion, Adhesion Accessories, ASTM D3359, ISO 2409, ГОСТ 15140
Cross Cut Adhesion Test Knives
TQC Cross Cut Adhesion knife sizes are available for different coating thicknesses and substrates and according to different standards.
Hardness: HRC 58 +/- 2
Cross Cut Adhesion Test Knife for C1000, C2000, and C3000 Test Kits
ORDERING INFORMATION
VF2355
Cutter for TQC Cross Cut Adhesion Test, 1 mm acc. to ISO 2409 & ASTM D3359
Round knife, suitable for C1000 test kits
VF2357
Cutter for TQC Cross Cut Adhesion Test, 2 mm acc. to ISO 2409 & ASTM D3359
Round knife, suitable for C1000 test kits
VF2358
Cutter for TQC Cross Cut Adhesion Test, 3 mm acc. to ISO 2409
Round knife, suitable for C1000 test kits
VF2359
Cutter for TQC Cross Cut Adhesion Test, 1 mm acc. to ASTM D3359 <2009
Round knife, suitable for C1000 test kits
VF1861
Cutter for TQC Cross Cut Adhesion Test, 1,5 mm acc. to ASTM D3359 <2009
Round knife, suitable for C1000 test kits
SP1702
Cutter for TQC Cross Cut Adhesion Test, 1 mm acc. to ISO 2409 & ASTM D3359
Suitable for CC2000 and CC3000 test kits
SP1703
Cutter for TQC Cross Cut Adhesion Test, 2 mm acc. to ISO 2409 & ASTM D3359
Suitable for CC2000 and CC3000 test kits
SP1704
Cutter for TQC Cross Cut Adhesion Test, 3 mm acc. to ISO 2409
Suitable for CC2000 and CC3000 test kits
SP1705
Cutter for TQC Cross Cut Adhesion Test, 1 mm acc. to ASTM D3359 <2009
Suitable for CC2000 and CC3000 test kits
SP1706
Cutter for TQC Cross Cut Adhesion Test, 1.5 mm acc. to ASTM
Suitable for CC2000 and CC3000 test kits
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
| Knife Model | CC1000, CC2000 & CC3000 |
| Size & Part # | 1mm VF2355, 2mm VF2357, 3mm VF2358, 1mm VF2359, 1.5mm VF1861, 1mm SP1702, 2mm SP1703, 3mm SP1704, 1mm SP1705, 1.5mm SP1706 |
Related products
- Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Temperature, Temperature and Climatic Testing
Thermometer ST-610B with TC type K input – TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mmSKU: TE1000
