No products in the cart.
TQC Sheen
Showing 97–144 of 303 results
- Conveyor Ground Tester
Conveyor Ground Test – LD5900
Conveyor ground test with five steps which informs you whether items to be coated are sufficiently grounded. Designed for electrostatic coating applications.
A poor ground of the pieces to be coated may result in a poor quality of the electrostatic coating work. Coating thickness may not be sufficient or the pieces may not be even covered.
Consult your paint manufacturer or the supplier of your spray equipment for correct values.
The LD5900 is a low cost, easy to use ground check that is battery operated.
SKU: LD5900 - ASTM D823, Film Application, Film Application Accessories
Cube Applicators
TQCSHEEN Cube applicator for applying a paint film of uniform thickness. Ideal for applying paint on test panels used on for instance a drying time recorder.
AB3700 – TQC Cube Applicator, gaps 38 & 76µm
AB3701 – TQC Cube Applicator, gaps 50 & 100µm
AB3702 – TQC Cube Applicator, gaps 75 & 150µm
AB3703 – TQC Cube Applicator, gaps on request (µm)
AB3705 – TQC Cube Applicator, gaps 1,5 & 3 mil
AB3706 – TQC Cube Applicator, gaps 2 & 4 mil
AB3707 – TQC Cube Applicator, gaps 3 & 6 mil
AB3708 – TQC Cube Applicator, gaps on request (mil)
AB3709 – TQC Cube Applicator, gaps 6 & 8 mil
AB3710 – Cube Applicator 50mm wide, gaps 50 & 100µm, reservoir Ø: 43 mm / 1.69 inch
AB3711 – Cube Applicator 50mm wide, gaps 150 & 200µm, reservoir Ø: 43 mm / 1.69 inch
AB3712 – TQC Cube Applicator, gaps 6 & 8 mil
SH0077 – 50mm Cube Film Applicator 150-200µmSKU: n/a - Climate Testing, Temperature, Temperature and Climatic Testing
Sato SK-L200THII Alpha datalogger+SK-LTHII-1 probe – HM8020
Climate Testing, Temperature, Temperature and Climatic TestingSato SK-L200THII Alpha datalogger+SK-LTHII-1 probe – HM8020
Sato SK-L200THII Alpha datalogger+SK-LTHII-1 probe – HM8020
Extremely compact data logger for recording temperature and air humidity. Complete with attached combiprobe (T/RV). A wire-combiprobe is optional. Directly programmable from the keypad or PC. Complete with attached combiprobe, USB cable and evaluation software.
SKU: HM8020 - ASTM D3276-07, Climate Testing, Dewpoint, ISO 8502-4, Recorders / Dataloggers, Temperature, Temperature and Climatic Testing
DewCheck 4 Series 2 – Dewpoint Meter | Dewmeter DC7100
ASTM D3276-07, Climate Testing, Dewpoint, ISO 8502-4, Recorders / Dataloggers, Temperature, Temperature and Climatic TestingDewCheck 4 Series 2 – Dewpoint Meter | Dewmeter DC7100
The TQC DewCheck 4 – Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. This easy to use and robust dewmeter conforms to ISO 8502-4 & ASTM D3276-07 and measures the relative humidity (%RH), ambient temperature (Ta) and surface temperature (Ts) and calculates the dewpoint temperature (Td) and the difference between the dewpoint temperature and the surface temperature (ÄT). The difference between the surface temperature and dewpoint temperature indicates the optimal climate conditions for painting. All parameters can be stored in the dew meter’s memory, tagged with a date and time.
For communication between DewCheck 4 dewmeter and a PC the DewCheck dew meter USB cable is standard supplied. To analyze the data the DewCheck 4 comes with the special Ideal Finish Analysis software. This software is the most advanced temperature and humidity monitoring software package for Dew-point Meters available today. It offers user friendly reporting functions for standard production work as well as advanced calculations for in depth analysis of the climate parameters prior to coating. Detailed graphic representations and custom reports help to make the right decisions.
SKU: DC7100 - Temperature, Temperature and Climatic Testing
Infrared Thermometer -30 +270°C – TE1004
Pocket sized infrared thermometer with laser pointer to measure surface temperature without making contact. The laser pointer identifies the target area easily. An illuminated display allows working in dark or poorly lit environments.
Fast and simple operation, just point and shoot and the surface temperature is shown immediately. Typical applications are with surfaces that are hard to reach, moving objects or electrical parts.
SKU: TE1004 - Temperature, Temperature and Climatic Testing
Infrared thermometer (-50 to + 750° C) – TE1005
A user-friendly TQC Infrared Thermometer Standard designed to measure surface temperature without making contact under harsh industrial circumstances. The laser pointer identifies the target area while rubber parts on the housing protect the instrument against mechanical damage. An illuminated display allows working in dark or poorly lit environments.
SKU: TE1005 - Temperature, Temperature and Climatic Testing
Eco Thermapen thermometer -49.9 to +149.9°C – TE0027
TQC Precision Thermometer Temperature Range: -49.9 to +149.9°CResolution: 0.1°C (°F alterable)Accuracy: ±0.5°C between -49.9 to 99.9°C, ±1°C above 100°CBattery: MN2400 (AAA)
Battery Lifetime: 8000 hours
Display: 15mm LCD
Dimensions: 19 x 52 x 155mm
Weight: 76 gramThe TQC Precision Thermometer is a handy pocket size thermometer with foldable stainless steel probe. Suitable for measurements in liquids and semisolids. Large clear display, ergonomic design and easy to clean. The instrument is equipped with an ON/OFF, MAX/MIN switch and can easily be set to Fahrenheit if necessary.
SKU: TE0027 - Accessory Products, CurveX Tools and Supplies, Temperature, Temperature and Climatic Testing
CurveX 4 Oven Logger Kit – CX4010
Accessory Products, CurveX Tools and Supplies, Temperature, Temperature and Climatic TestingCurveX 4 Oven Logger Kit – CX4010
Profiling an industrial powder coating oven starts here with the CurveX 4 8-channel Oven Logger Kit. It contains all necessary items, just add the desired magnetic or clamp-type probes to make the oven logger kit complete.
Includes:
• CurveX 4 Oven Logger with Ideal Finish Analysis Software
• Insulation Box
• Energy Absorber
• Silicone Seal
• Probe Identification Set
• CaseSKU: CX4010 - CurveX Tools and Supplies, Temperature, Temperature and Climatic Testing
CurveX 4 Oven Temperature Data Logger – CX4005
CurveX Tools and Supplies, Temperature, Temperature and Climatic TestingCurveX 4 Oven Temperature Data Logger – CX4005
The CurveX 4 is an intelligent temperature data logging system that was specially designed to control curing processes in the coating industry. The CX4005 has 8 k-type channels.
Included:
• CurveX 4 Oven Logger
• Factory calibrated, calibration certificate
• Ideal Finish Analysis Software
• USB-C Cable
• USB Memory stick
• Plastic Carrying CaseSKU: CX4005 - Elasticity Testing, Resistance & Deformation
Cylindrical Bend Test 100mm Incl Mandrel Set (Imperial) – SP1822
Elasticity Testing, Resistance & DeformationCylindrical Bend Test 100mm Incl Mandrel Set (Imperial) – SP1822
The TQC Cylindrical Bend Test is a very robust yet elegant testing instrument to indicate the elasticity, elongation and adhesion of a paint film at bending stress. The TQC Cylindrical Bend Test is designed to perform tests according to the latest standard ASTM D522, assessing the resistance of a coating, paint, varnish or related products to cracking and/or detachment from a surface when, subjected to bending around a cylindrical mandrel under standard conditions.
The diameter of the mandrels are (in inches): 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1
The luxurious desktop holder with 7 mandrels can also be wall mounted.SKU: SP1822 - ASTM D522, Elasticity Testing, Resistance & Deformation
Cylindrical Bend Test 100mm Incl Mandrel Set (Metric) – SP1820
ASTM D522, Elasticity Testing, Resistance & DeformationCylindrical Bend Test 100mm Incl Mandrel Set (Metric) – SP1820
The TQC Cylindrical Bend Test is used to determine the elasticity adhesion and elongation of paint on sheet metal in accordance with ISO 1519. A test panel (max. size 150 x 100 mm) is bent over a cylindrical mandrel. The smaller the diameter of the mandrel, the larger the tension on the coating. The test panel is then checked for cracks or damage in the coating.
The luxurious desktop holder with 14 mandrels can also be wall mounted.
Mandatory test in Qualicoat, QIB and GSB accredited laboratories.
SKU: SP1820 - ASTM D1084, ASTM D5725, Contact Angle Testing, Tappi T588
DAT 1121 Dynamic Contact Angle Tester – PG1050 or DAT 1122 – PG1051
ASTM D1084, ASTM D5725, Contact Angle Testing, Tappi T588DAT 1121 Dynamic Contact Angle Tester – PG1050 or DAT 1122 – PG1051
DAT 1121 Dynamic Contact Angle Tester – PG1050 – or – DAT 1122 Dynamic Contact Angle Tester – PG1051
The DAT measures the contact angle (dynamic and static), surface tension, penetration, surface energy and spreading. The instrument uses a sophisticated camera to capture the fall/ shape of the drop, the shape on the sample and eventually the penetration. The pump and the camera work closely together. This is critical to have the correct amount of liquid and have each test start at the same time.
SKU: n/a - Destructive Dry Film Thickness Gage, DIN 50986, ISO 2808, Thickness Testing
Cutting Tools for SuperPig III Destructive Paint Inspection Gauge
Destructive Dry Film Thickness Gage, DIN 50986, ISO 2808, Thickness TestingCutting Tools for SuperPig III Destructive Paint Inspection Gauge
Cutting Tools for SuperPig Destructive Paint Inspection Gauge
SP1111 – Cutting tool 1 for Super Pig 20-1800µm
SP1112 – Cutting tool 2 for Super Pig, 10-900µm
SP1113 – Cutting tool 3 for Super Pig, 5-450µm
SP1114 – Cutting tool 4 for Super Pig, 2-180µmSKU: n/a - Uncategorized
Digital Laser – Touch Tachometer – LU2000
Specification Measuring Range: PHOTO TACH 2.5 to 99. 999 RPM CONTACT TACH 0.5 to 19,999 RPM SURFACE SPEED 0.05 to 1,999.9 (m/min.)
Resolution: PHOTO TACH 0.1 RPM(2.5 to 999.9RPM) 1RPM(over 1000 RPM) CONTACT TACH 0.1 RPM (0.5 to 999.9RPM) 1 RPM (over 1000 RPM) SURFACE SPEED 0.01 m/min. (0.05 to 99.99m/min) 0.1 m/min (over 100m/min)
SKU: LU2000 - PH / Conductivity, Temperature and Climatic Testing
Ecoscan Cond 6+ Conductivity gauge – HI0040
Ecoscan Cond 6+ Conductivity gauge
Powerful portable conductivity gauge with large measuring range. Equipped with cable electrode and integrated temperature probe for automatic temperature compensation. The high accuracy and robust protective casing make this gauge ideal for use in the field and laboratory.SKU: HI0040 - Pictorial Surface Standards
FITZ S Atlas 2 Of Coating Defects – LD3061
The Fitz’s Atlas 2 of coating defects is a reference manual with over 300 color images, providing a clear and concise description of all problems that could occur, as well as their possible causes. The book is divided into the following sections:
Welding faults
PreSurface conditions
Coating defects
Microscopy
Marine fouling.SKU: LD3061 - Accessory Products, ASTM D1084, ISO 11998, Paint Charts and Panels, Scratch Testing, Thickness Testing, Wet Abrasion Scrub | Washability Test
TQC Test charts checkered, A3, sealed, 250 pcs – VF2354
Accessory Products, ASTM D1084, ISO 11998, Paint Charts and Panels, Scratch Testing, Thickness Testing, Wet Abrasion Scrub | Washability TestTQC Test charts checkered, A3, sealed, 250 pcs – VF2354
Test Charts
297x420mm A3 Black / White Checkered
Supplied: 250 pieces, Sealed.
Certificate Included
SKU: VF2354 - ASTM D1210, ASTM D1316, BS 3900-C6, DIN EN 21524, Dispersion, Grindometers, ISO 1524, JIS K 5600-2-5
GRINDOMETERS
ASTM D1210, ASTM D1316, BS 3900-C6, DIN EN 21524, Dispersion, Grindometers, ISO 1524, JIS K 5600-2-5GRINDOMETERS
The TQC Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc.. TQC Grindometers are available in three models:
- Double grooves with graded slopes graduated in different parameters: Microns, NS (Hegman) and PCU (North)
- Single wide groove with parameters: Microns and Hegman.
- Single groove with only Microns.
Material of main block ASAB Stavax ESR medical grade stainless tool steel. Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) Surface treatment: polished Overall accuracy: ± 2 µm. Material of scraper ASAB Stavax ESR medical grade stainless tool steel. Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55, (through hardened*) & tempered. Surface treatment: black chromed. Overall straightness: ± 2 µm. *Through hardening versus Case-hardening or surface hardening. Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.
TQC Grindometer FM15/2 DIN-ISO Grindometers or Fineness of Grind Gauges are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate etc..
Most TQC Sheen Grindometers have double grooves with graded slopes graduated in three different parameters: µm (microns), NS (Hegman) and PCU (North). Gauge and beveled scraper are made of hardened stainless steel and have an accuracy of 2 µm.
Grindometer Scale overviewSKU: n/a - Hardness / Scratch Resistance
SHORE HARDNESS GAUGE DIN 53505 ISO 868 ASTM D2240
The TQC Shore Hardness Gauge is a reliable instrument for measuring the impression hardness of soft materials such as coatings, plastics and rubber. Equipped with a drag indicator, which holds the highest measured result. Delivery includes a simple test block.
Complies with: DIN 53505, ISO 868 and ASTM D 2240
SKU: n/a - Hardness / Scratch Resistance, Hardness Tester
Shore Hardness Gauge Test Stand – LD0559
The TQC Shore Hardness Gauge Test Stand is suitable for Shore A, C, and D* type Durometer. The test stand construction includes operating handle, adjustable glass stage, (height) adjustable Durometer fixture.
SKU: LD0559 - Accessory Products, Scrub Abrasion | Washability Tester Supplies & Accessories
Camera Tool Kit for the TQC Sheen Scrub, Abrasion, and Washability tester – AB6015
Accessory Products, Scrub Abrasion | Washability Tester Supplies & AccessoriesCamera Tool Kit for the TQC Sheen Scrub, Abrasion, and Washability tester – AB6015
The TQC Sheen Camera Tool is created for the TQC Sheen Scrub, Abrasion and Washability tester (AB6000 & AB6010). As washability tests are time consuming, we created a camera tool and software to save operator time.
SKU: AB6015
