No products in the cart.
Hardness / Scratch Resistance
SHORE HARDNESS GAUGE DIN 53505 ISO 868 ASTM D2240
The TQC Shore Hardness Gauge is a reliable instrument for measuring the impression hardness of soft materials such as coatings, plastics and rubber. Equipped with a drag indicator, which holds the highest measured result. Delivery includes a simple test block.
Complies with: DIN 53505, ISO 868 and ASTM D 2240
The TQC Shore Hardness Gauge is a reliable instrument for measuring the impression hardness of soft materials such as coatings, plastics and rubber. Equipped with a drag indicator, which holds the highest measured result. Delivery includes a simple test block.
Durometers measure the depth of an indentation in the material created by a given force on a standardized presser foot. The depth is dependent on the hardness of the material, its viscoelastic properties, the shape of the presser foot, and the duration of the test. The basic test requires applying the force in a consistent manner, without shock, and measuring the hardness.
Features
Made of anodized aluminum and stainless steel
Drag pointer gives the maximum reading of the hardness
Revolving graduation scale
Test Block included
Specifications
Range: 0-100
Accuracy: 0,006
Material: Stainless steel, anodized aluminum
Width: 25mm
Height: 110mm
Length: 60mm
Weight: 230gr
Complies with: DIN 53505, ISO 868 and ASTM D 2240
ORDERING INFORMATION
LD0550
TQC Shore Hardness Gauge type A for materials such as elastomers,
vinyl, rubber, leather, pvc, silicone-rubber, teflon, neopreen, etc..
Range: 0 -100 shore
Accuracy: 1 shore
Dimensions: 102 x 57 x 44 mm
LD0551
TQC Shore Hardness Gauge type D for materials such as polyester,
ABS, nylon, polyurethane, kevlar, acryl, wood, polystyrene etc..
Range: 0 -100 shore
Accuracy: 1 shore
Dimensions: 102 x 57 x 44 mm
Documents
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
| Type | Type A – LD0550, Type D – LD0551 |
Range: 0-100
Accuracy: 0,006
Material: Stainless steel, anodised aluminum
Width: 25mm
Height: 110mm
Length: 60mm
Weight: 230gr
Related products
- Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Hardness / Scratch Resistance
PENDULUM HARDNESS TESTER
The TQC Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates the hardness.
The instrument has an easy menu-driven interface with jog dial. The automated electronic counting mechanism is not affected by reflections from the surrounding area. The water-level is located on the test specimen, rather than on the instrument’s base. Once the instrument is leveled further calibration is not required. The gas-spring supported transparent draft cover allows easy access to all parts of the instrument.
TQC’s Pendulum Hardness Tester is a modular system. The instrument itself can be used for both the König and- Persoz method. Both pendulums should be ordered separately. After placing the correct pendulum, switching between the two measuring methods only takes a push of a button. The Pendulum is positioned fully automatically by means of a stepper motor. Also the release of the Pendulum is automated through electro-magnetic system. The end of a test is indicated by a visual and acoustic signal.
The TQC Pendulum Hardness Tester base device is available as a 110VAC / 50/60Hz and a 230VAC / 50Hz model.
SKU: n/a - Hardness / Scratch Resistance, Hardness Tester
Concrete Inspection Hammer (Mechanical) – LD0500
Instrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and indicates the strength of the concrete.
For analysing concretes with a minimum resistance of 10 N/mm2 to values as high as 110 N/mm2, which are now achievable with the ingredients and mixes available today.
SKU: LD0500 - Abrasion Testing, ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, Hardness / Scratch Resistance, Hardness Tester, ISO 11998, Scrub Abrasion | Washability Tester Supplies & Accessories, Wet Abrasion Scrub | Washability Test
Scrub Abrasion and Washability Tester AB6000 & AB6010
Abrasion Testing, ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, Hardness / Scratch Resistance, Hardness Tester, ISO 11998, Scrub Abrasion | Washability Tester Supplies & Accessories, Wet Abrasion Scrub | Washability TestScrub Abrasion and Washability Tester AB6000 & AB6010
The Scrub Abrasion and Washability Tester tests the resistance of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion.
SKU: n/a
