No products in the cart.
CurveX Tools and Supplies
CurveX insulation box flat – CX2003
Insulation box – Flat / Excluding Heat Absorber
$1,284.00
Documents
curvex_stainless_insulation_box_cx2003_d44.pdf
Description
Insulation box – Flat / Excluding Heat Absorber
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Height: 70 mm / 2.76 in
Length: 255 mm / 10.04 in
Width: 225 mm / 8.86 in
Weight: ± 2650 grams / 5.85 lbs
Suitable Heat Absorber: CX2014
Max temperature 300°C / 572°F, refer to datasheet for insulation curve.:
Related products
- Climate Testing Accessories, CurveX Tools and Supplies
CLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Climate Testing Accessories, CurveX Tools and SuppliesCLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Small and elegant clamp-type probes to measure temperature of any object. Silver tipped sensor is thermally isolated from the clamp by ceramics. The capton-wrapped, metal braid and PTFE coated probe cables last significantly longer than other designs.
SKU: n/a - Dry Film Thickness, Dry Film Thickness Gauges
POSIPEN A – LD6000
PEN TYPE FERROUS THICKNESS GAGE .25-20 MILS
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Used for:
Small, hot or hard-to-reach surfaces
Spot Checks – conveniently fits in a shirt pocket
Hot Sprayed CoatingsIdeal for:
Refineries, petrochemical plants
Platers – electroplating, chrome, zinc, galvanizing
Powder coatersSKU: LD6000 - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695
