The Fitz’s Atlas 2 of coating defects is a reference manual with over 300 color images, providing a clear and concise description of all problems that could occur, as well as their possible causes. The book is divided into the following sections:
Welding faults
PreSurface conditions
Coating defects
Microscopy
Marine fouling.
$402.00
Fitz’s Atlas 2 of coating defects
Available in English only.
| Weight | 1 lbs |
|---|---|
| Dimensions | 10 × 11 × 1 in |
Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning
Contains a series of 43 full-color reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15). Also contains photos of SP 11 surfaces with a restored profile, a revised guide to the use of reference photographs, a new table of standards and conditions depicted, and additional explanatory notes.
The ACT Orange Peel Standards consist of ten 4×6 inch panels with graduated degrees of orange peel (flow) from rough to smooth. Each panel within the set is painted black and labeled with a corresponding flow rating (orange peel) from 1 to 10.
The ideal tool for the frequent user and for testing on hard substrates such as metal.
The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well.
In 2007 updated version of the standard measure for the visual evaluation of rust and purity levels of non-coated steel. Also known as the “Swedish steel blasting grades” SS 05 59 00 (Sa). Contains high-quality colour photographs for estimating the rust levels and purity levels after cleaning manually or by machine (also with blasting).
Target audience: Blasting and painting companies and their clients, paint technicians, advice bureaux and industrial coating businesses.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
