No products in the cart.
Accessory Products, CurveX Tools and Supplies
CurveX Insulation Box Standard / Excluding Heat Absorber – CX2005
Insulation Box – Standard / Excluding Heat Absorber
$1,525.00
Documents
CX2005-Standard-Box-Data-Sheet.pdf
Description
Insulation Box – Standard / Excluding Heat Absorber
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Height: 140 mm / 5.51 in
Length: 255 mm / 10.04 in
Width: 225 mm / 8.86 in (locks incl.)
Weight: ±4200 gram / 9.26 lbs
Suitable Heat Absorber: CX2011
Max temperature 300°C / 572°F, refer to datasheet for insulation curve.:
Related products
- Film Application
4-SIDED FILM APPLICATORS
The TQC 4-Sided Film Applicator (Quadruplex) has four application sides to apply paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is equipped with a removable lateral guidance support for straight application. The high grade stainless steel will not be affected by acid or base elements.
SKU: n/a - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856
