TQC Ring Stand For Viscosity Cup
The TQC Ring Stand for Viscosity Cup is a ring stand made of galvanized steel, suitable for all TQC Viscosity Cups according DIN, ISO and ASTM.
TQC Ring Stand For Viscosity Cup
|Dimensions||12 × 12 × 5 in|
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculations
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclip
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
TQC Clamp-type probes for measuring air temperature.
The ideal tool for the frequent user and for testing on hard substrates such as metal.
The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well.
TQC Samarium Cobalt Magnet probes to measure air temperature in box ovens and conveyor ovens in the powder coating industry. Ideal for measuring the temperature profiles of the oven during the curing process.