No products in the cart.
ASTM D4287, BS3900-A7, Cone & Plate Viscometer Accessories, ISO 2884, Viscosity Accessories
Cone 5-50 Poise (SH490/754/D3) with 5 Certified Oils (SH490/ – SH1427
Cone 5-50 poise (SH490/754/D3) with 5 certified oils (SH490/
$1,350.00
Documents
SH1693-CP1-user-manual-12
SHCP1-Cone-and-Plate-Viscometer-d44-12
Cone 5-50 Poise (SH490/754/D3) with 5 Certified Oils (SH490/
The Cone and Plate Viscometer (CP1) is a standard test for dynamic viscosity measurements. It is faster and more accurate by use of new high precision microprocessor controls. As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM). These are generally accepted to be representative of paint application via a roller or brush and so reflect ‘real world’ application.
Temperature controlled
As most viscosity measurements are highly temperature sensitive the samples are placed on a temperature controlled plate which can be set from 5°C to 65°C.
The Cone and Plate Base Unit comes without cone kit. Cone kits to be ordered separately.
TQC Sheen Cone and Plate Viscometer (excl. cone) (CP1)
| Weight | 3 lbs |
|---|---|
| Dimensions | 5 × 5 × 6 in |
You may also like…
Related products
- Climate Testing Accessories, CurveX Tools and Supplies
CLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Climate Testing Accessories, CurveX Tools and SuppliesCLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Small and elegant clamp-type probes to measure temperature of any object. Silver tipped sensor is thermally isolated from the clamp by ceramics. The capton-wrapped, metal braid and PTFE coated probe cables last significantly longer than other designs.
SKU: n/a - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DIN 50986, Dry Film Thickness, Dry Film Thickness Gauges, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1000
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100
