No products in the cart.
Documents
ORDERING INFORMATION
VF2048
TQC Viscosity Cup ISO 2431
Type: made of titanium anodised aluminum, with fixed nozzle orifice Ø 3 mm
Optional: possible to certify by calibration with certified oils
VF2049
TQC Viscosity Cup ISO 2431
Type: made of titanium anodised aluminum, with fixed nozzle orifice Ø 4 mm
Optional: possible to certify by calibration with certified oils
VF2183
TQC Viscosity Cup ISO 2431
Type: made of titanium anodised aluminum, with fixed nozzle orifice Ø 5 mm
Optional: possible to certify by calibration with certified oils
VF2050
TQC Viscosity Cup ISO 2431
Type: made of titanium anodised aluminum, with fixed nozzle orifice Ø 6 mm
Optional: possible to certify by calibration with certified oils
VF2051
TQC Viscosity Cup ISO 2431
Type: made of titanium anodised aluminum, with fixed nozzle orifice Ø 8 mm
Optional: possible to certify by calibration with certified oils
| Weight | 2 lbs |
|---|---|
| Dimensions | 9 × 7 × 5 in |
| Size | 3mm, 4mm, 5mm, 6mm, 8mm |
Related products
- Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (cutting wheel not included) VF1856
The Cross Cut Adhesion Test Kit CC1000 by TQC is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.
Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
SKU: VF1856 - ASTM D1200, Viscosity
VISCOSITY CUP ASTM D1200 FORD
The TQC Viscosity Cup ASTM D1200 Ford is a range of titanium anodized aluminum or stainless steel viscosity cups with fixed stainless steel nozzle (inner cavity). the viscosity cups are suitable for laboratory use with a stand. Widly used for measuring paint, lacquers and other liquids.
SKU: n/a
