The Sheen Lory Cup is designed for quick measurements on location or during production processes. The bottom of this cup is provided with a small hole and needle point. The product measured will flow out of the small hole and as soon as the needle point appears during this process, the flow time is determined.
$184.00
The Sheen Lory Cup is designed for quick measurements on location or during production processes. The bottom of this cup is provided with a small hole and needle point. The product measured will flow out of the small hole and as soon as the needle point appears during this process, the flow time is determined.
Sheen Lory Viscosity Cup
The Sheen Lory Cup is designed for quick measurements on location or during production processes. The bottom of this cup is provided with a small hole and needle point. The product measured will flow out of the small hole and as soon as the needle point appears during this process, the flow time is determined.
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
| MATERIAL | Brass Zinc Plate, Steel |
|---|
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.
The TQC Viscosity Cup Immersion Ford is a range of titanium anodized aluminum or stainless steel (SS303) viscosity cups with stainless steel inner cavity fixed nozzle and handle. Ideal for measuring coatings and other fluids during application or production.
The Cone and Plate Viscometer is a standard test for dynamic viscosity measurements. As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM).
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
• The blade holder is kept at a set distance from the surface with the aid of two wheels (ball bearings). Reproducible test results guaranteed.
• Ergonomically shaped handle
• Wide range of knife sizes available for different coating thicknesses and substrates and according to different standards.
Each TQC Cross Cut Adhesion Test KIT CC3000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.
Knives and tape can be ordered as a spare as well
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
