Dark Light

BIRD-TYPE FILM APPLICATORS, 4-SIDED


TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.

We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.

Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C  to -70°C), hardness HRC 55 (through hardened*) & tempered.

Surface treatment:
polished

Overall accuracy:
± 2 µm

*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.

$510.00$726.00

Documents

Datasheet

TQC Sheen Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 60, 75, 80, 100 and 150mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.

We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the Bird-type applicator.

Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.

OVERVIEW MODELS
Width 50mm 60mm 75mm 80 mm 90mm 100mm 150mm
50/100/150/200 µm VF2161 VF2162 VF2163 VF1581
Custom  µm VF1837 VF2164 VF1530 VF1536 VF1535 VF1580

 

ORDERING INFORMATION

VF2161

TQC Bird-type applicator 50mm, 50/100/150/200µm,
calibration certificate included

VF2162

TQC Bird-type applicator 75mm, 50/100/150/200µm,
calibration certificate included

VF2163

TQC Bird-type applicator 100mm, 50/100/150/200µm,
calibration certificate included

VF2164

TQC Bird-type filmapplicator 60mm, gaps as desired
Max. gap size: 3000µm, calibration certificate included

VF1837

TQC Bird-type film applicator, width 50mm, 4 gaps as desired
Max. gap size: 3000µm, calibration certificate included

VF1530

TQC Bird-type film applicator, width 75mm, 4 gaps as desired
Max. gap size: 3000µm, calibration certificate included

VF1535

TQC Bird-type film applicator, width 100mm, 4 gaps as desired
Max. gap size 3000µm, calibration certificate included

VF1536

TQC Bird-type film applicator, width 80mm, 4 gaps as desired
Max. gap size 3000µm, calibration certificate included

VF1580

TQC Bird-type film applicator width 150mm, gaps as desired
Max. gap size: 3000µm, calibration certificate included

VF1581

TQC Bird-type film applicator width150mm, 50/100/150/200µm,
calibration certificate included

SKU: N/A Category: Tag:
Weight 2 lbs
Dimensions 8 × 6 × 4 in
Part No.

VF2161 – 50mm, VF2162 – 75mm, VF2163 – 100mm, VF2164 – 60mm, VF1530 – 75mm, VF1535 – 100mm, VF1536 – 80mm, VF1580 – 150mm, VF1581 – 150mm, VF1837 – 50mm

Material: ASAB Stavax ESR medical grade stainless tool steel, Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened)

Accuracy: +/- 2 µm

Surface treatment: Polished

Scroll to Top