The TQC Viscosity Cup DIN 53211 consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precize, with fixed stainless steel nozzle.
The TQC Viscosity Cup DIN 53211 is available in titanium anodized aluminum or stainless steel (SS303). Each viscosity cup comes with a hard plastic storage case, with protective soft material on the inside.
Widly used in laboratory, version to be used with stand. VIEW INTERCHANGEABLE NOZZLES HERE
$175.00 – $297.00
vf1999_d44_din53211-14.pdf (988.80 KB)
Sheen-Product-Overview-77.pdf (10.20 MB)
viscosity-cup-interchangeable-nozzle-vf2020-d44-1-14.pdf (815.86 KB)
Sheen-Product-Overview-81.pdf (10.20 MB)
DIN 53211
TQC Viscosity Cup (Similar to DIN 53211)
Type: made of titanium anodized aluminum, with fixed nozzle, orifice 2 mm
TQC Viscosity Cup (Similar to DIN 53211)
Type: made of titanium anodized aluminum, with fixed nozzle, orifice 3 mm
TQC Viscosity Cup DIN 53211
Type: made of titanium anodized aluminum, with fixed nozzle, orifice 4 mm
Optional: possible to certify by calibration with certified oils
TQC Viscosity Cup (Similar to DIN 53211)
Type: made of titanium anodized aluminum, with fixed nozzle, orifice 6 mm
TQC Viscosity Cup (Similar to DIN 53211)
Type: made of titanium anodized aluminum, with fixed nozzle, orifice 8 mm
TQC Viscosity Cup DIN 53211
Type: made of stainless steel, with fixed nozzle, orifice 4 mm
Optional: possible to certify by calibration with certified oils
Sheen Viscosity Cup DIN 53211 with Interchangeable Nozzle
Type: made of anodized aluminum, to be used with interchangeable nozzles. Complete with stainless steel nozzle retainer. Nozzles to be ordered separately, VIEW NOZZLES HERE.
| Weight | 2 lbs |
|---|---|
| Dimensions | 9 × 7 × 5 in |
| Type | Titanium Anodized Aluminum 2mm – VF2000, Titanium Anodized Aluminum 3mm – VF2001, Titanium Anodized Aluminum 4mm – VF1999, Titanium Anodized Aluminum 6mm – VF2003, Titanium Anodized Aluminum 8mm – VF2004, Stainless Steel 4mm – VF2015, For interchangeable nozzle – VF2020 |
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
The Cone and Plate Viscometer is a standard test for dynamic viscosity measurements. As non-Newtonian fluids exhibit different viscosities relative to the shear rate applied, the Cone and Plate Viscometer tightly controls it to 10,000S-1 (B.S./ ISO requirements) or to 12,000S-1 (ASTM).
Adhesion tape 3M 8981 50mx25mm
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
