No products in the cart.
Shop
Showing 97–144 of 495 results
- Accessory Products, ASTM D 2162, BS EN ISO / IEC 17025, ISO Guide 34, Viscosity, Viscosity Accessories
TQC Sheen Viscosity Calibration Oils
Accessory Products, ASTM D 2162, BS EN ISO / IEC 17025, ISO Guide 34, Viscosity, Viscosity AccessoriesTQC Sheen Viscosity Calibration Oils
Viscosity Calibration oils are manufactured in accordance with ASTM D 2162, the primary method for viscosity standards manufacture. They are fully traceable to national standards and are test equipment compatible. They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO Guide 34.
SKU: n/a - Accessory Products, Film Application Accessories
MFFT Chiller
MFFT Chiller | Vapor Compression
The MFFT Chiller is a re-circulating chiller unit with;
- Ultra-compact design
- 480W Cooling Capacity (@17°C set point)
- Plug in and use – No customer settings)
- Low cost of purchase and operation
- Ideal for OEM Applications
SKU: 13303-RHO - ASTM D 2354, Film Application, ISO 2115
MFFT 90 Minimum Film Forming Temperature Instrument
- Measures the minimum film forming temperature of water based coatings
- Determines the MFFT of latex, emulsions and adhesives
- -10°C to 90°C operation
- MFFT Coalescing Agent Case Studies
- What is MFFT and how is it determined?
SKU: 13302-RHOPOINT - Temperature, Temperature and Climatic Testing
Thermometer ST-610B with TC type K input – TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mmSKU: TE1000 - Hardness / Scratch Resistance, Hardness Tester
TQC SHEEN Automatic Scratch Tester – SP0100
The TQC Sheen Automatic Scratch Tester enables customers to test coating hardness on coated metal test panels with improved repeatability. Test for scuffing and measure scratch resistance quickly and easily with this handy automated scratch hardness tester.
SKU: SP0100 - Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1100 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1100
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - ASTM D823, Automatic Film Applicator, Film Application
TQC SHEEN Small Automatic Panel Sprayer (1 gun) (4500N) – SH0586
ASTM D823, Automatic Film Applicator, Film ApplicationTQC SHEEN Small Automatic Panel Sprayer (1 gun) (4500N) – SH0586
TQC Sheen Small Automatic Panel Sprayer, 1 gun (previously 4500N) with configurable lift settings. It also has a switch with custom predefined Lift factory settings. The lift setting can be configured in steps of 10mm up to maximum of 500mm.
SKU: SH0586 - ASTM D823, Automatic Film Applicator, Film Application
TQC SHEEN Medium Automatic Panel Sprayer (2 guns) (4700N) – SH0590
ASTM D823, Automatic Film Applicator, Film ApplicationTQC SHEEN Medium Automatic Panel Sprayer (2 guns) (4700N) – SH0590
TQC Sheen Medium Automatic Panel Sprayer, 2 guns (previously 4700N). The models SH0582 and SH0581 are 2 new models, which are also based on Sheen models 4500N and 4700N, however with configurable lift settings.
SKU: SH0590 - Film Application
4-Sided Film Applicator, Dual Reservoir, 100|200|300|400ΜM – VF2179
Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.
SKU: VF2179 - Film Application
4-SIDED FILM APPLICATORS
The TQC 4-Sided Film Applicator (Quadruplex) has four application sides to apply paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is equipped with a removable lateral guidance support for straight application. The high grade stainless steel will not be affected by acid or base elements.
SKU: n/a - Climate Testing, Dewpoint
Dew Point Meter Logger PosiTector DPM and DPM L+
Magnetic probes attach to steel structures for monitoring climatic conditions. Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, difference between surface and dew point temperatures, and wet bulb temperature.
- Fast response, precision sensors provide accurate, repeatable readings
- Environmentally sealed enclosure – weatherproof, dustproof, and shockproof—meets or exceeds IP65
- Internal memory storage of 10,000 datasets (60,000 readings)
Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32SKU: DPMLPLUS - Moisture, Moisture Meters, Temperature and Climatic Testing
TQC SHEEN Concrete Moisture Meter – LI9200
Moisture, Moisture Meters, Temperature and Climatic TestingTQC SHEEN Concrete Moisture Meter – LI9200
The TQC Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just pressing the instrument against the concrete surface.
SKU: LI9200 - Optical Inspection Tools
ACEBEAM X80UV KIT
the X80-UV uses 16x high output UV LEDs to ensure that you will be able to track down your game and also includes 4x high performance white LEDs so you will never be left out in the dark whilst out on the trails. UV also has multiple other uses ranging from forensics to curing certain resins in manufacturing & repairs.
KIT INCLUDES: X80UV, Batteries, Charges, Safety Glasses and Case.
SKU: ACEBEAM X80UVKIT - Temperature, Temperature and Climatic Testing
KTA 914 Non-Contact Infrared Thermometer
The KTA Non-Contact Infrared Thermometer is engineered for accurate temperature measurement ensuring precision and efficiency in every evaluation. With its rapid and accurate infrared technology, this IR Thermometer provides instant surface temperature readings, aiding in meticulous inspections without contact. Its user-friendly design and reliable performance make it an indispensable asset for professionals seeking precision in coatings analysis, enabling swift and accurate assessments for superior quality control. The 12:1 distance to spot size makes gathering the average reading of an entire wall to a precise point an easy task.
SKU: KTA914 - Coating Thickness Gages, Film Thickness, Thickness Testing, Wet Film Thickness, WFT Wet Film Thickness
KTA-Tator Certified Stainless Steel Wet Film Thickness Gauge
Coating Thickness Gages, Film Thickness, Thickness Testing, Wet Film Thickness, WFT Wet Film ThicknessKTA-Tator Certified Stainless Steel Wet Film Thickness Gauge
KTA Tator Wet Film Thickness Gauge reads both mills and microns. This revolutionary Gauge will change they way you measure WFT.
SKU: 525252 - Surface Characteristics, Surface Profile
KTA POG (Pressure Orifice Gage)
The KTA POG measures the orifice size of an abrasive blast cleaning nozzle. This nozzle orifice gage can be used to monitor nozzle wear that can result in lower blast pressure, higher air volume demand (CFM), and/or decreased efficiency.
SKU: 9132018 - ASTM D4417, DFT Dry Film Thickness Gauges, Dry Film Thickness, ISO 2808, Material Thickness, Smoothness Testing, Surface Profile, Thickness Testing, ГОСТ Р 51694
Foil Thickness Gauge FTG2000 – SP1570
ASTM D4417, DFT Dry Film Thickness Gauges, Dry Film Thickness, ISO 2808, Material Thickness, Smoothness Testing, Surface Profile, Thickness Testing, ГОСТ Р 51694Foil Thickness Gauge FTG2000 – SP1570
The TQC Film thickness gauge is a high precision film and foil thickness gauge, especially developed for measuring so-called “replica tapes” as Testex®, used mainly to measure the surface profile.
SKU: SP1570 - Hardness / Scratch Resistance, Hardness Tester
Concrete Inspection Hammer (Mechanical) – LD0500
Instrument for testing the quality of concrete and other construction materials according to UNI EN 12504-2 and ASTM C805. The recoil-force of the automatic hammer is displayed on the scale and indicates the strength of the concrete.
For analysing concretes with a minimum resistance of 10 N/mm2 to values as high as 110 N/mm2, which are now achievable with the ingredients and mixes available today.
SKU: LD0500 - RAL Effect
RAL E3 Effect
RAL E3 Effect Fan Deck – In the RAL EFFECT E3 color fan you will experience the fascinating tension and harmony in the combination of solid and metallic colors! With an overview of a total of 490 color tones, the color fan presents the brilliant variety of nuances and the practical, application-related color spectrum of the RAL EFFECT color collection. It expands the space of your creative designs visibly and inspiringly!
SKU: VF6615 - ASTM D2583, Hardness / Scratch Resistance, Hardness Tester
GYZJ-934-1 Barcol Hardness Tester VF6500
The Barcol Hardness Tester Impressor is a convenient tool for testing the hardness of aluminum, aluminum alloys, copper, brass and other materials including plastics and fiberglass. The instrument is designed for use on fabricated parts and assemblies as well as on raw stock.
SKU: VF6500 - Corrosion / Weathering, ISO 17872, Scratch Testing
MACHU SCRATCHING TOOL
TQC Machu Scratching Tool to perform a Machu test (corrosion test) with. Each tool is provided with a 1mm width cutter to cut the coating down to the metal, complying with ISO 17872.
Two models are available:
The TQC Machu Scratching Tool Basic is based on the CC2000 model. with a self positioning knife bracket to expose the substrate with a perpendicular cut through the coating.The TQC Machu Scratching Tool Professional is based on the CC3000 model with adjustable cutting depth and two ball bearings to guide the cut. This guarantees reproducible results.
Mandatory test in Qualicoat and QIB accredited laboratories.
SKU: n/a - Paint Thickness Gauge, Wet Film Thickness, WFT Wet Film Thickness
Paint Wet Film Thickness Combs (25-Pack) WF-SD
Paint Thickness Gauge, Wet Film Thickness, WFT Wet Film ThicknessPaint Wet Film Thickness Combs (25-Pack) WF-SD
Purchase a 25-Pack of Wet Film Thickness Comb Gauges come in a square card shape measure 1 – 80 Mil Scale or 25 – 2032 Micron Scale and are used in standard practices for measurement of wet film thickness of organic coatings by notched gauges. It is compact, low cost, and wallet sized.
Sold in packs of 25.
SKU: WF-SD - Hardness / Scratch Resistance, Hardness Tester
PENCIL HARDNESS TEST ACC. WOLFF WILBORN
The TQC Pencil Hardness Test according Wolff Wilborn provides in a simple method to test the scratch hardness of coatings. In this test, pencils in a range of 6B to 8H hardness-grade are used. The pencil is moved scratching over the surface under a 45° angle with a constant pressure. Then an optical assessment is carried out to see which pencil hardness damages the surface. Delivered with a set of 20 Koh-i-noor pencils and a pencil sharpener.
SKU: n/a - DFT Dry Film Thickness Gauges, Dry Film Thickness
POSIPEN A – LD6000
PEN TYPE FERROUS THICKNESS GAGE .25-20 MILS
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Used for:
Small, hot or hard-to-reach surfaces
Spot Checks – conveniently fits in a shirt pocket
Hot Sprayed CoatingsIdeal for:
Refineries, petrochemical plants
Platers – electroplating, chrome, zinc, galvanizing
Powder coatersSKU: LD6000 - Hardness / Scratch Resistance, Hardness Tester, Scratch Testing
TQC HARDNESS TEST SCRATCH STANDARD and PRO
Hardness / Scratch Resistance, Hardness Tester, Scratch TestingTQC HARDNESS TEST SCRATCH STANDARD and PRO
The TQC Hardness Pen is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products. A tungsten carbide tip is drawn over the surface with a defined constant pressure. The pressure on the tip can be changed using the slide or by changing the spring. A visual mark on the surface after use of the TQC Hardness Pen indicates a fail of the surface hardness or wear/scratch resistance. Can be used on flat and curved surfaces.
There are 2 versions available, the Standard and Pro.
The Standard version is supplied with 3 springs and one tip:
0-3N, graduation 10 g
0-10N, graduation 50 g
0-30N, graduation 150 g
Tip 1mmThe pro version includes the above as well as:
Tip 0,5mm
Tip 0,75mm
Pen holder with guidance wheels, which provides very stable load on tip and makes it easier to apply force.The laser-engraved scale is clearly visible on the grey background.
SKU: n/a - DFT Dry Film Thickness Gauges, Dry Film Thickness, Thickness Testing
PosiPen® Magnetic Pull-Off Coating Thickness Gage
DFT Dry Film Thickness Gauges, Dry Film Thickness, Thickness TestingPosiPen® Magnetic Pull-Off Coating Thickness Gage
PosiPen® has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces.
SKU: PEN
