The Wet Film Comb Thickness Gauge is a standard practice for measurement of wet film thickness of organic coatings by notched gauges. It is compact, low cost, and wallet sized.
Sold in packs of 25.
$35.00
| Weight | .05 lbs |
|---|---|
| Dimensions | 3 × 3 × 3 in |
The PosiTector 6000 Coating Thickness Gauge is available in 2 models: the PosiTector 6000 Standard and Advanced. There are many probes to choose from either with a PosiTector 6000 gauge body or you may purchase a probe separately. See the PosiTector 6000 descriptions and downloadable pdf brochures in the description area below for more info.
Testex Micrometer Dial Thickness Gage, Metric Units. To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.
Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods.
For use with all Type 2, electronic coating thickness gages.
Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film.
The TQC SP1000 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculations
SP1000
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclip
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.
Great Lakes Gages, LLC
3689 Hadley Rd.
Metamora, MI 48455
