No products in the cart.
Accessory Products, Film Application Accessories
MFFT Chiller
MFFT Chiller | Vapor Compression
The MFFT Chiller is a re-circulating chiller unit with;
- Ultra-compact design
- 480W Cooling Capacity (@17°C set point)
- Plug in and use – No customer settings)
- Low cost of purchase and operation
- Ideal for OEM Applications
$1,910.00
Frequently Bought Together
MFFT Chiller Physical Attributes | |
|---|---|
| Dimensions | 380mm (H) x 180mm (W) x 435mm (D) |
| Weight | Dry 20kg Wet 21kg |
| Noise Level | 64 dB(A) (optional manual adjustment) |
| Toolless Access | No |
| Cooling Capacity | 0.5kW (setpoint 20°C, ambient 20°C) |
| Temperature Control Attributes | |
|---|---|
| Technology | Vapor compression |
| Evaporator Technology | Brazed plate heat exchanger |
| Duty at +20°C Ambient, Setpoint +20°C | 500kW |
| Duty at +20°C Ambient, Setpoint +15°C | 300kW |
| Refrigerant & Charge | R134a, 360g |
| Temperature Range (standard) | +4°C to +35°C (setpoint dependent on load) |
| Temperature Range (extended) | -10°C to +35° |
| Control Method | Continuous running, duty settable Low temperature fridge cutoff |
| Temperature Stability (with constant load) | ‡0.1°C |
| Temperature Resolution | N/A |
| Maximum THR (Total Heat Rejection) | 850W |
| Ambient Air Temperature Range | +35° |
| Water Circuit Attributes | |
|---|---|
| System Volume | 0.64L |
| Pump Type | Sanso 24VDC brushless centrif pump 1.9bar(d/h) 3L/min (o/f) |
| Pump Capability | 3.5L/min @1 bar |
| Pressure Control (settable pressure relief valve) | N/A |
| Standard Fittings | Pushfit 12mm |
| Standard Chemical Compatibility | Tap Water, DI-water |
| Electrical Attributes | |
|---|---|
| (90-264 Vac, 1-/2~ 50-60Hz) U-spec | Yes, 2A@115Vac, 1A@230 Vac L+N+E or L1+L2+E |
| Overcurrent Fault – cleared restart mode | Automatic |
| Safety Interlocks, Protections, Standards & Indicators | |
|---|---|
| 1st Party Approvals | CE |
| 3rd Party Approvals | TBC |
| Empty Fluid Reservoir Alarm | Not fitted |
| Half-full Fluid Reservoir Indicator | Not fitted |
| Full Fluid Reservoir Indicator | Not fitted |
| Low Fluid Flow Alarm | Not fitted |
| Temperature Out of Range Alarm | Not fitted |
| Compressor HP Switch | Standard, via compressor control PCB |
| Motor Thermal Overload | Not fitted |
| Emergency Off | Standard, via fuse |
| Warranty Options | 2 year parts, 1 year labour Enhanced warranty options |
| Interlock Restored, Restart Mode | Automatic |
Downloads
rhopoint-minimum-film-forming-temperature-chiller-datasheet-english.pdf
| Weight | 41 lbs |
|---|---|
| Dimensions | 15 × 8 × 28 in |
| Physical Attributes | |
|---|---|
| Dimensions | 380mm (H) x 180mm (W) x 435mm (D) |
| Weight | Dry 20kg Wet 21kg |
| Noise Level | 64 dB(A) (optional manual adjustment) |
| Toolless Access | No |
| Cooling Capacity | 0.5kW (setpoint 20°C, ambient 20°C) |
| Temperature Control Attributes | |
|---|---|
| Technology | Vapor compression |
| Evaporator Technology | Brazed plate heat exchanger |
| Duty at +20°C Ambient, Setpoint +20°C | 500kW |
| Duty at +20°C Ambient, Setpoint +15°C | 300kW |
| Refrigerant & Charge | R134a, 360g |
| Temperature Range (standard) | +4°C to +35°C (setpoint dependent on load) |
| Temperature Range (extended) | -10°C to +35° |
| Control Method | Continuous running, duty settable Low temperature fridge cutoff |
| Temperature Stability (with constant load) | ‡0.1°C |
| Temperature Resolution | N/A |
| Maximum THR (Total Heat Rejection) | 850W |
| Ambient Air Temperature Range | +35° |
| Water Circuit Attributes | |
|---|---|
| System Volume | 0.64L |
| Pump Type | Sanso 24VDC brushless centrif pump 1.9bar(d/h) 3L/min (o/f) |
| Pump Capability | 3.5L/min @1 bar |
| Pressure Control (settable pressure relief valve) | N/A |
| Standard Fittings | Pushfit 12mm |
| Standard Chemical Compatibility | Tap Water, DI-water |
| Electrical Attributes | |
|---|---|
| (90-264 Vac, 1-/2~ 50-60Hz) U-spec | Yes, 2A@115Vac, 1A@230 Vac L+N+E or L1+L2+E |
| Overcurrent Fault – cleared restart mode | Automatic |
| Safety Interlocks, Protections, Standards & Indicators | |
|---|---|
| 1st Party Approvals | CE |
| 3rd Party Approvals | TBC |
| Empty Fluid Reservoir Alarm | Not fitted |
| Half-full Fluid Reservoir Indicator | Not fitted |
| Full Fluid Reservoir Indicator | Not fitted |
| Low Fluid Flow Alarm | Not fitted |
| Temperature Out of Range Alarm | Not fitted |
| Compressor HP Switch | Standard, via compressor control PCB |
| Motor Thermal Overload | Not fitted |
| Emergency Off | Standard, via fuse |
| Warranty Options | 2 year parts, 1 year labor Enhanced warranty options |
| Interlock Restored, Restart Mode | Automatic |
Related products
- Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
CLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesCLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Small and elegant clamp-type probes to measure temperature of any object. Silver tipped sensor is thermally isolated from the clamp by ceramics. The capton-wrapped, metal braid and PTFE coated probe cables last significantly longer than other designs.
SKU: n/a - Accessory Products, Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250
