No products in the cart.
Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
WIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
ORDERING INFORMATION
Art. No. CX2063
Wire- type probes for curve-x datalogger
cable length: 1500 mm
Range: 0 – 300ºC
Art. No. CX2064
Wire- type probes for curve-x datalogger cable length: 3000 mm
Range: 0 – 300ºC
Art. No. CX2067
Wire- type probes for curve-x datalogger cable length: 5000 mm
Range: 0 – 300ºC
Art. No. CX2200 – Call to Order
Glass tape 33mtr, 19mm width, up to 265°C
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
| Option | CX2063: Curve-X surface probe (Type=wire, L=1.5m, T=300°C/572°F), CX2064: Curve-X surface probe (Type=wire, L=3m, T=300°C/572°F), CX2067: Curve-X surface probe (Type=wire, L=5m, T=300°C/572°F) |
Related products
- Film Application
4-Sided Film Applicator, Dual Reservoir, 100|200|300|400ΜM – VF2179
Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.
SKU: VF2179 - Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
CLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesCLAMP-TYPE SURFACE PROBES FOR CURVEX DATALOGGER CX2030,40,41,45,46,48,49
Small and elegant clamp-type probes to measure temperature of any object. Silver tipped sensor is thermally isolated from the clamp by ceramics. The capton-wrapped, metal braid and PTFE coated probe cables last significantly longer than other designs.
SKU: n/a - Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856 - DFT Dry Film Thickness Gauges, Dry Film Thickness
POSIPEN A – LD6000
PEN TYPE FERROUS THICKNESS GAGE .25-20 MILS
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Used for:
Small, hot or hard-to-reach surfaces
Spot Checks – conveniently fits in a shirt pocket
Hot Sprayed CoatingsIdeal for:
Refineries, petrochemical plants
Platers – electroplating, chrome, zinc, galvanizing
Powder coatersSKU: LD6000 - ASTM D3276-07, Climate Testing, Dewpoint, ISO 8502-4, Recorders / Dataloggers, Temperature, Temperature and Climatic Testing
DewCheck 4 Series 2 – Dewpoint Meter | Dewmeter DC7100
ASTM D3276-07, Climate Testing, Dewpoint, ISO 8502-4, Recorders / Dataloggers, Temperature, Temperature and Climatic TestingDewCheck 4 Series 2 – Dewpoint Meter | Dewmeter DC7100
The TQC DewCheck 4 – Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. This easy to use and robust dewmeter conforms to ISO 8502-4 & ASTM D3276-07 and measures the relative humidity (%RH), ambient temperature (Ta) and surface temperature (Ts) and calculates the dewpoint temperature (Td) and the difference between the dewpoint temperature and the surface temperature (ÄT). The difference between the surface temperature and dewpoint temperature indicates the optimal climate conditions for painting. All parameters can be stored in the dew meter’s memory, tagged with a date and time.
For communication between DewCheck 4 dewmeter and a PC the DewCheck dew meter USB cable is standard supplied. To analyze the data the DewCheck 4 comes with the special Ideal Finish Analysis software. This software is the most advanced temperature and humidity monitoring software package for Dew-point Meters available today. It offers user friendly reporting functions for standard production work as well as advanced calculations for in depth analysis of the climate parameters prior to coating. Detailed graphic representations and custom reports help to make the right decisions.
SKU: DC7100
