No products in the cart.
Accessory Products, Hardness / Scratch Resistance Accessories
Tip for hardness test Diameter 0.5 mm / R=0,25 – SP0012
Tip for hardness test Diameter 0.5 mm / R=0,25 – SP0012
$142.00
Tip for hardness test Diameter 0.5 mm / R=0,25 – SP0012
| Weight | .5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
WIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesWIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
SKU: n/a - Conveyor Ground Tester
Conveyor Ground Test – LD5900
Conveyor ground test with five steps which informs you whether items to be coated are sufficiently grounded. Designed for electrostatic coating applications.
A poor ground of the pieces to be coated may result in a poor quality of the electrostatic coating work. Coating thickness may not be sufficient or the pieces may not be even covered.
Consult your paint manufacturer or the supplier of your spray equipment for correct values.
The LD5900 is a low cost, easy to use ground check that is battery operated.
SKU: LD5900 - Film Application
BIRD-TYPE FILM APPLICATORS, SINGLE GAP
TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness. The TQC Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
Some models are equipped with removable guidance plates for straight application.
We can not give guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type film applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a
