No products in the cart.
Accessory Products, Moisture Accessories
Spare Karsten-tube vertical – LI7505
Spare Karsten-tube vertical
$93.00
Related products
- Accessory Products, Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140
Tape for Adhesion Test (ISO 2409 1999) 25mm x 50m – SP3025
Accessory Products, Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140Tape for Adhesion Test (ISO 2409 1999) 25mm x 50m – SP3025
Adhesion tape 3M 8981 25mm x 50m
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
SKU: SP3025 - Film Application
4-SIDED FILM APPLICATORS
The TQC 4-Sided Film Applicator (Quadruplex) has four application sides to apply paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is equipped with a removable lateral guidance support for straight application. The high grade stainless steel will not be affected by acid or base elements.
SKU: n/a - Film Application
BIRD-TYPE FILM APPLICATORS, SINGLE GAP
TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness. The TQC Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
Some models are equipped with removable guidance plates for straight application.
We can not give guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type film applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a - Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a
