No products in the cart.
PH / Conductivity
Palmtop salinity meter ecoscan salt 6TDS6/03K EcoScan TDS 6 in kit – HI0050
Palmtop salinity meter ecoscan salt 6TDS6/03K EcoScan TDS 6 in kit – HI0050
$750.00
Palmtop salinity meter ecoscan salt 6TDS6/03K EcoScan TDS 6 in kit
EcoScan Salt 6 for quick, accurate salinity measurements in laboratories, field and schools. The instrument has a lot of unique features like push-button Calibration with ±1% full scale accuracy, Automatic Temperature Compensation (ATC) for the optimum accuracy under fluctuating temperatures, self-Diagnosis with message codes for easy troubleshooting and an electrode with Built-in ATC designed for minimal air bubble entrapment during measurement.
A protective rubber boot shields the meter from drops and features a sturdy built-in stand for easy bench-top operation.
| Weight | 1 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000 - Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
MAGNETIC PROBES FOR CURVEX DATALOGGER CX206, 69, 73
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesMAGNETIC PROBES FOR CURVEX DATALOGGER CX206, 69, 73
TQC Samarium Cobalt Magnet probes to measure air temperature in box ovens and conveyor ovens in the powder coating industry. Ideal for measuring the temperature profiles of the oven during the curing process.
SKU: n/a - Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1100 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1100
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100
