No products in the cart.
Pictorial Surface Standards
Iso-8501-2 Purity levels of painted steel surfaces – LD3027
Purity levels of painted steel surfaces from which the paint layer has been weathered in places. Indispensable when repairing damage to corrosion-resistant paint systems and in the conservation or, for example, welding joints after construction.
$575.00
ISO8501-2
Purity levels of painted steel surfaces from which the paint layer has been weathered in places. Indispensable when repairing damage to corrosion-resistant paint systems and in the conservation or, for example, welding joints after construction.
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856 - Pictorial Surface Standards
SSPC-VIS 3 PICTORIAL SURFACE STANDARD HAND | POWER TOOL
Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning
Contains a series of 43 full-color reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15). Also contains photos of SP 11 surfaces with a restored profile, a revised guide to the use of reference photographs, a new table of standards and conditions depicted, and additional explanatory notes.
SKU: SSPC-VIS 3 - Pictorial Surface Standards
SSPC-VIS 1 Pictorial Surface Standard Dry Blast Cleaning
Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning.
SSPC’s most widely used visual reference features over 50 full-color photos of previously coated and uncoated, rusted steel surfaces before and after dry abrasive blast cleaning. Similar to the Swedish and British standards, but the pictures of the required final appearances match the written descriptions in the USA standards. Cleanliness requirements for conditions depicted are defined by the SSPC surface preparation specifications for white metal (SP 5), near-white (SP 10), commercial (SP 6), industrial (SP 14), and brush-off (SP 7) blast finishes. Appendix photographs show variations in white metal surfaces caused by different metallic and non-metallic abrasives, profile depth, angle of view, and lighting. Now with guides in both English and Spanish!
SKU: SSPC-VIS 1 - Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Accessory Products, Adhesion, ASTM D4541, Pull Off
Dolly Drill For Adhesion Test – LD9250
The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.
For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.
SKU: LD9250
