No products in the cart.
Pictorial Surface Standards
Iso-8501-2 Purity levels of painted steel surfaces – LD3027
Purity levels of painted steel surfaces from which the paint layer has been weathered in places. Indispensable when repairing damage to corrosion-resistant paint systems and in the conservation or, for example, welding joints after construction.
$575.00
ISO8501-2
Purity levels of painted steel surfaces from which the paint layer has been weathered in places. Indispensable when repairing damage to corrosion-resistant paint systems and in the conservation or, for example, welding joints after construction.
| Weight | 5 lbs |
|---|---|
| Dimensions | 12 × 12 × 6 in |
Related products
- Pictorial Surface Standards
Tank Coatings Condition Guide – LD3075
A guide to assist ship’s staff in the assessment of tank, hold and space coatings of existing ships for the purpose of determining compliance with the Rules and Regulations for the Classification of Ships. The guide handles the definition of the tank coating condition in Good / Fair / Poor classification. It also contains the IACS methodology to divide tanks into a number of smaller “areas under consideration” which can easily be identified. Further are included schematics to help defining area determination, percentage of coatings breakdown for specific ship structures and a comparison of common rust scales. A series of full color pictures of tank coatings in various conditions and a section that describes and shows the hotspots for corrosion and other common defects is also part of the guide.
The last section contains sketched indicating common nomenclature and terminology applied to typical structure of major ship types.
Year of publication: 2008
Size: 95 x 135 mmSKU: LD3075 - Pictorial Surface Standards
SSPC-VIS 4|NACE VIS 7 Pictorial Standard Waterjetting
Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting
Shows a total of six different steel surfaces (two uncoated and four previously coated) before and after waterjetting. Photographs illustrate four separate degrees of cleaning (WJ 1, WJ 2, WJ 3, and WJ 4) for each initial condition, with additional photos that depict the appearance light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specification for high- and ultrahigh-pressure water jetting (SP 12/NACE 5).
SKU: SSPC-VIS 4 - Appearance Testing, Color, Pictorial Surface Standards, RAL Classic
RAL Classic Colors – K1, K5, and K7
Appearance Testing, Color, Pictorial Surface Standards, RAL ClassicRAL Classic Colors – K1, K5, and K7
The RAL CLASSIC Colour Collection
The 4-digit RAL colors have been the standard for choosing colors for more than 70 years now. At the beginning the color collection included 40 different colors. Its number has risen to 213 today. The basic collection for matt color shades is called RAL 840-HR, the one for glossy color shades RAL 841-GL. Both basic collections contain color samples that are being used by important institutions to cover a wide range of applications and are constantly adapted to the requirements of the industry. The registers are being used as color samples for designs. They also contain safety- and signaling colors and fulfil the color requirements of DIN regulations.
SKU: n/a - Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140
Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
Adhesion, Adhesion (Wood), DFT Dry Film Thickness Gauges, ISO 2409, Paint Thickness Gauge, WFT Wet Film Thickness, ГОСТ 15140Cross Cut Adhesion Test Kit (Master Paint Plate) – SP3000
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additional tools
- Wet film thickness gauge ranging from 50 microns up to 160 microns.
- On the corners there is an edge grind checker for correct roundness of edges.
- At the bottom is a wet film applicator ranging from 0 to 180 µm.
- The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Tapes for the cross cut adhesion test
Tape For Adhesion Test according ISO 2409:2003
Tape For Adhesion Test according ISO 2409:1999 can be ordered separately as well.SKU: SP3000
