No products in the cart.
Impact Tester SP1880, SP1890, SP1891, SP1895, and SP1896
Overview
The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14
Mandatory test in Qualicoat, QIB and GSB accredited laboratories.
Documents
Standards for impact testing
Below mentioned standards are a list of the possible standards. If the required standard is not listed below please contact TQC to check if adoption of this standard is possible*:
SP1880 | SP1890 | SP1891 | SP1895 | SP1896 | |
| Type of Impact | Indirect | Direct | Direct | Direct | Direct |
| ISO 6272-1:2002 |  | • |  |  |  |
| ISO 6272-2:2002 | • |  |  |  |  |
| ISO 6272:1993 |  |  | • |  |  |
| ASTM D 2794:2004 | • |  |  |  |  |
| ASTM G14-04 |  |  |  | • |  |
| JIS K 5600-5-3:1989 | • | • |  |  |  |
| EN 12206-1:2004 | • |  | • | • |  |
| EN 13523-5:2001 | • | • |  |  |  |
| AAMA 2605-05 | • |  | • |  |  |
| Qualicoat 2006 | • |  | • |  |  |
| Qualisteelcoat 2008 | • |  | • |  |  |
| Canadian Standards Association (CSA) |  |  |  |  | • |
* Conformation to a required standard depends on the impact tester type. The combination of items can change to comply with another standard.
ORDERING INFORMATION
SP1880
TQC Impact Test according to ISO 6272-2 and ASTM D2794
Type: Indirect Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø12.7 mm , punch Ø15.9 mm, weight 1 kg, die Ø16.3 mm. Max test panel thickness: 4,5 mm
SP1890
TQC Impact Test according to ISO 6272-1
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg. Max. test panel thickness: 1,25mm
SP1891
TQC Impact Test according to ISO 6272-1 and ASTM D2794 (before 1993)
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg, ball Ø15.9 mm, die 16.3mm, weight 0.9 kg
SP1895
TQC Impact Test according to ASTM G14
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø15.9 mm, weight 1.361 kg and a V-notch vise with spring clamp to hold the pipe
SP1896
TQC Impact Test according to CSA
| Weight | 2 lbs |
|---|---|
| Dimensions | 51 × 3 × 3 in |
| Model | SP1880, SP1890, SP1891, SP1895, SP1896 |
Type: Indirect Impact Tester
Content: Base plate assembly, guide tube, release collar,
punch & Oslash: 12.7 mm , punch Ø