No products in the cart.
Accessory Products, Cone & Plate Viscometer Accessories
Ball Spindle 0,1-75p – DV2011
Large Round Ball Spindle for the Digital RotoThinner Viscometer 0,1-75p – DV2011
$385.00
Frequently Bought Together
Large Round Ball Spindle for the Digital RotoThinner Viscometer – DV2011
Ball Spindle 0,1-75p – DV2011
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 3 × 3 in |
Related products
- Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
WIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesWIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
SKU: n/a - Accessory Products, Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140
Tape for Adhesion Test (ISO 2409 1999) 25mm x 50m – SP3025
Accessory Products, Adhesion (Wood), Adhesion Accessories, ISO 2409, Scratch Testing, ГОСТ 15140Tape for Adhesion Test (ISO 2409 1999) 25mm x 50m – SP3025
Adhesion tape 3M 8981 25mm x 50m
The TQC Tape for Adhesion Test (ISO 2409:1999) is used to perform a cross-cut hatch adhesion test according to ISO 2409:2003 standard.
SKU: SP3025 - Adhesion
Cross Cut Adhesion Test Kit CC1000 (exclud. knife) VF1856
CC1000 BASIC (holder only) VF1848 includes the TQC Cross cut tester CC1000 Basic (Holder only, knives and accessories not included).
CC1000 KIT VF1856 includes a soft grip handle (Excl. knife, this needs to be ordered separately), nylon brush, illuminated magnifier, adhesive tape (adhesion to steel 4.3N/cm), a 4 mm Allen key, and a sturdy case
SKU: VF1856 - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695
