No products in the cart.
Film Application
4-Sided Film Applicator, Dual Reservoir, 100|200|300|400ΜM – VF2179
Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.
$895.00
ORDERING INFORMATION
VF2179
TQC Quadruplex applicator, 2 x 60mm reservoir, each with 4 gaps: 100/200/300/400µm
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
Related products
- Adhesion, Adhesion (Wood)
Adhesion Test Kit (HPK) – SP3100
Adhesion Test Kit for Coatings on Wood
The TQC Adhesion Test Kit (HPK) is a method developed in the Netherlands by FOSAG and SKH. This method determines the adhesion of new and old paint layers on wood and wood like materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape and the remaining paint on the wood. Finally illustrations are used for classifying the damage from class 0 to 5. Delivery includes cutting tool and also tape.
The Tape For Adhesion Test can be ordered separately as well.
SKU: SP3100 - Film Application
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.Surface treatment:
polishedOverall accuracy:
± 2 µm*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.SKU: n/a - ASTM D823, Film Application, Film Application Accessories
Cube Applicators
TQCSHEEN Cube applicator for applying a paint film of uniform thickness. Ideal for applying paint on test panels used on for instance a drying time recorder.
AB3700 – TQC Cube Applicator, gaps 38 & 76µm
AB3701 – TQC Cube Applicator, gaps 50 & 100µm
AB3702 – TQC Cube Applicator, gaps 75 & 150µm
AB3703 – TQC Cube Applicator, gaps on request (µm)
AB3705 – TQC Cube Applicator, gaps 1,5 & 3 mil
AB3706 – TQC Cube Applicator, gaps 2 & 4 mil
AB3707 – TQC Cube Applicator, gaps 3 & 6 mil
AB3708 – TQC Cube Applicator, gaps on request (mil)
AB3709 – TQC Cube Applicator, gaps 6 & 8 mil
AB3710 – Cube Applicator 50mm wide, gaps 50 & 100µm, reservoir Ø: 43 mm / 1.69 inch
AB3711 – Cube Applicator 50mm wide, gaps 150 & 200µm, reservoir Ø: 43 mm / 1.69 inch
AB3712 – TQC Cube Applicator, gaps 6 & 8 mil
SH0077 – 50mm Cube Film Applicator 150-200µmSKU: n/a
