No products in the cart.
DFT Dry Film Thickness Gauges, Dry Film Thickness, Thickness Testing
PosiPen® Magnetic Pull-Off Coating Thickness Gage
PosiPen® has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, and hot-dip galvanizing on steel. Can be used on small, hot or hard-to-reach surfaces.
$250.00
Documents
PosiPen® Manual
PosiPen® Brochure
Video
Description
- Easy-to-Use
- Lightweight—easy to carry, just like a ball point pen
- Rugged—not affected by mechanical shock, acid, oil, water and dust
No user adjustment required
Highly wear resistant probe tip for long life and continuous accuracy
Certificate of Calibration showing traceability to PTB included (Long Form)
Conforms to ASTM D7091/B499, ISO 2808 and others
| Weight | 2 lbs |
|---|---|
| Dimensions | 4 × 4 × 6 in |
English
Metric
Range
0.25 to 20 mils
5 to 500 microns
Tolerance
±10% and 0.1 mil
±10% and 2.5 microns
Temperature
-150° F to 450° F
-100° C to 230° C
Gage comes complete with leather pouch, instructions, Long Form Certificate of Calibration traceable to PTB, two (2) year warranty.
Related products
- Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness Testing
DeFelsko Certified Plastic Shims
Accessory Products, Coating Thickness Accessories, DFT Dry Film Thickness Gauges, Thickness TestingDeFelsko Certified Plastic Shims
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Each shim is packaged in a protective sleeve
- Certificate of Calibration showing traceability to PTB is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
SKU: n/a - ASTM D4417, DFT Dry Film Thickness Gauges, Dry Film Thickness, ISO 2808, Material Thickness, Smoothness Testing, Surface Profile, Thickness Testing, ГОСТ Р 51694
Foil Thickness Gauge FTG2000 – SP1570
ASTM D4417, DFT Dry Film Thickness Gauges, Dry Film Thickness, ISO 2808, Material Thickness, Smoothness Testing, Surface Profile, Thickness Testing, ГОСТ Р 51694Foil Thickness Gauge FTG2000 – SP1570
The TQC Film thickness gauge is a high precision film and foil thickness gauge, especially developed for measuring so-called “replica tapes” as Testex®, used mainly to measure the surface profile.
SKU: SP1570 - Climate Testing, Coating Thickness Gages, Density, Dewpoint, DFT Dry Film Thickness Gauges, Dry Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness Testing
PosiTector 6000 Standard/Advanced Body | DeFelsko
Climate Testing, Coating Thickness Gages, Density, Dewpoint, DFT Dry Film Thickness Gauges, Dry Film Thickness, Gloss / Haze / Hiding Power, Gloss Meters, Hardness / Scratch Resistance, Hardness Tester, Material Thickness, PH / Conductivity, PosiTector 6000, PosiTector® 6000, Salt/Chloride Testing, Surface Profile, Temperature, Temperature and Climatic Testing, Thickness TestingPosiTector 6000 Standard/Advanced Body | DeFelsko
PosiTector 6000 Coating Thickness Gauge and Probes: Gauge Body comes in Standard and Advanced. Order probe with or without a gauge body. Scroll down to the ordering table to easily add items to your cart.
SKU: n/a - Accessory Products, Coating Thickness Accessories, PosiTector 6000 Accessories
Certified Coated Metal Plates & Certified Polystyrene Blocks
Accessory Products, Coating Thickness Accessories, PosiTector 6000 AccessoriesCertified Coated Metal Plates & Certified Polystyrene Blocks
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Zero Plates available for both Certified Coated Metal Plates and Certified Polystyrene Blocks.SKU: n/a - ASTM D7091, Dewpoint, DFT Dry Film Thickness Gauges, SSPC PA-2, Temperature, Temperature and Climatic Testing, Thickness Testing
Byko-Test Coating Thickness Gauge
ASTM D7091, Dewpoint, DFT Dry Film Thickness Gauges, SSPC PA-2, Temperature, Temperature and Climatic Testing, Thickness TestingByko-Test Coating Thickness Gauge
The byko-test gauge offers a unique solution to monitor environmental conditions by measuring Film thickness Fe/NFe, Dew Point, Air Temperature, and Relative Humidity all in one.
There is also a dry film thickness only version available, the byko-test Lite.
SKU: DF-B3790