No products in the cart.
Accessory Products, CurveX Tools and Supplies
Wire- type probe for CurveX datalogger, cable length: 1500 mm Range: 0 – 480ºC / 0 – 896°F – CX2087
Wire- type probe for CurveX datalogger, cable length: 1500 mm Range: 0 – 480ºC / 0 – 896°F
$170.00
Wire- type probe for CurveX datalogger, cable length: 1500 mm Range: 0 – 480ºC / 0 – 896°F
| Weight | 1 lbs |
|---|---|
| Dimensions | 5 × 5 × 2 in |
Related products
- Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness Testing
TQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
Destructive Dry Film Thickness Gage, DFT Dry Film Thickness Gauges, DIN 50986, Dry Film Thickness, ISO 2808, Thickness TestingTQC SP1000 Super-pig Destructive Dry Film Thickness Gauge – SP1100
The TQC SP1100 Superpig is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope with measuring reticle.
Features:
– Made of Titanium anodised aluminum
– Three knife sizes and one crosscut knife in one holder
– Ergonomic design: revolving-system to change knifes
– Bright white LED lights ensure clear vision through the microscope
– Small size eases use in corners
– Engraved scaling (D-factor) for easy calculationsSP1100
Super-pig, destructive coating thickness gauge, range: 2 to 2000 microns
Microscope : Magnification 50X (with graduation-scale)
Scale range : 0,00 — 2,50 mm (rectilinear measured)
Variation : Accuracy depends on chisel cut angle and users reading Battery : AAA 1,5 volt
Material : Titanium anodised aluminum
Width : 25mm
Height : 110mm
Length : 60mm
Delivery: SuperPIG with wrist strap, black marker, cutting knifes 1, 2, 3, hex diagonal wrench, leather pouch with beltclipSKU: SP1100 - Accessory Products, Climate Testing Accessories, CurveX Tools and Supplies
WIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Accessory Products, Climate Testing Accessories, CurveX Tools and SuppliesWIRE-TYPE PROBES FOR CURVEX DATALOGGER CX2063,64,67
Wire-type probes to measure either air or surface temperature. Measuring element is an open thermocouple that can be attached by adhesive tape or other mechanical means.
SKU: n/a - Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140
CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
Adhesion, Adhesion (Wood), ASTM D3359, ISO 2409, ГОСТ 15140CC3000 Cross Cut Adhesion Test Kit (excluding knife) SP1695
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
FULLY ADJUSTABLE
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
SKU: SP1695 - Film Application
4-Sided Film Applicator, Dual Reservoir, 100|200|300|400ΜM – VF2179
Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.
SKU: VF2179
