No products in the cart.
Hardness / Scratch Resistance Accessories
Weight 4000g Shore D for TQC Stand – LD0554
Weight 4000g Shore D for TQC Stand
$237.00
Related products
- Conveyor Ground Tester
Conveyor Ground Test – LD5900
Conveyor ground test with five steps which informs you whether items to be coated are sufficiently grounded. Designed for electrostatic coating applications.
A poor ground of the pieces to be coated may result in a poor quality of the electrostatic coating work. Coating thickness may not be sufficient or the pieces may not be even covered.
Consult your paint manufacturer or the supplier of your spray equipment for correct values.
The LD5900 is a low cost, easy to use ground check that is battery operated.
SKU: LD5900 - Temperature, Temperature and Climatic Testing
Thermometer ST-610B with TC type K input – TE1000
A tough, high-quality thermometer suitable for use with the interchangeable type ‘K’ thermocouple probes.
The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.
Equipped with functions for holding the current value as well as the maximum value.
Range : -50° to +1300°C
Resolution : 0,1°C or 0,1°F
Accuracy : ±(0,5%±1°C), ±(0,5%±2°F)
Dimensions : 165mm x 76mm x 43mmSKU: TE1000 - CurveX Tools and Supplies, Temperature, Temperature and Climatic Testing
CURVEX 3 BASIC DATALOGGER CX3005 or CX3010
CurveX Tools and Supplies, Temperature, Temperature and Climatic TestingCURVEX 3 BASIC DATALOGGER CX3005 or CX3010
The CurveX 3 Basic is an oven recorder designed for everyday use in powder coating lines.
The CX3005 is a 4-channel temperature datalogger built in a sturdy machined aluminium case that fulfils the basic needs for quality control in powder coating applications. Its ease of use and affordable price level makes it the ideal job-coaters instrument.
To use a CurveX 3 Basic to the fullest an insulation box, heat absorber/bracket and probes are necessary. All CurveX insulation boxes and CurveX probes, and the single heat absorber / bracket can be used with the CurveX 3 Basic. See the accessory list
CurveX 3 Basic features
• Operate through only 3 large buttons
• Meaningful feedback of multi coloured LED’s
• Factory calibrated for immediate use, calibration certificate included
• Downloads data through a standard USB port
• Rechargeable battery pack through USB connector
• Large memory of max. 160.000 readings
• Memory for 10 different batches, automatically overwrites the oldest results
• Programmable “paint type” memory for immediate “pass / fail” result
• Flat design, only 16 mm, for use in low clearance ovens
• Compatible with Ideal Finish Analysis softwareSKU: n/a - ASTM D3276-07, Climate Testing, Dewpoint, ISO 8502-4, Recorders / Dataloggers, Temperature, Temperature and Climatic Testing
DewCheck 4 Series 2 – Dewpoint Meter | Dewmeter DC7100
ASTM D3276-07, Climate Testing, Dewpoint, ISO 8502-4, Recorders / Dataloggers, Temperature, Temperature and Climatic TestingDewCheck 4 Series 2 – Dewpoint Meter | Dewmeter DC7100
The TQC DewCheck 4 – Dewpoint Meter (DPM)/ Dewmeter is an extremely versatile dewpoint meter to measure and record all climate parameters required to treat surfaces. This easy to use and robust dewmeter conforms to ISO 8502-4 & ASTM D3276-07 and measures the relative humidity (%RH), ambient temperature (Ta) and surface temperature (Ts) and calculates the dewpoint temperature (Td) and the difference between the dewpoint temperature and the surface temperature (ÄT). The difference between the surface temperature and dewpoint temperature indicates the optimal climate conditions for painting. All parameters can be stored in the dew meter’s memory, tagged with a date and time.
For communication between DewCheck 4 dewmeter and a PC the DewCheck dew meter USB cable is standard supplied. To analyze the data the DewCheck 4 comes with the special Ideal Finish Analysis software. This software is the most advanced temperature and humidity monitoring software package for Dew-point Meters available today. It offers user friendly reporting functions for standard production work as well as advanced calculations for in depth analysis of the climate parameters prior to coating. Detailed graphic representations and custom reports help to make the right decisions.
SKU: DC7100
