No products in the cart.
Pictorial Surface Standards
SSPC-VIS 3 PICTORIAL SURFACE STANDARD HAND | POWER TOOL
Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning
Contains a series of 43 full-color reference photographs to be used as a supplement to the SSPC standards for hand and power tool cleaned steel. Shows a total of seven different steel surfaces (four uncoated and three previously coated) before and after hand tool cleaning (SP 2), power tool cleaning with power wire brushes and sanding discs (SP 3), power tool cleaning to bare metal (SP 11), and commercial grade power tool cleaning (SP 15). Also contains photos of SP 11 surfaces with a restored profile, a revised guide to the use of reference photographs, a new table of standards and conditions depicted, and additional explanatory notes.
$220.00
ORDERING INFORMATION
SSPC-VIS 3 Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning
| Weight | 1 lbs |
|---|---|
| Dimensions | 10 × 11 × 1 in |
Related products
- Pictorial Surface Standards
SSPC-VIS 5|NACE VIS 9 Wet Abrasive Blast Cleaning –
Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning
Pictorial Standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition, with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near-white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.
SKU: SSPC-VIS 5 - Pictorial Surface Standards
Iso-8501-2 Purity levels of painted steel surfaces – LD3027
Purity levels of painted steel surfaces from which the paint layer has been weathered in places. Indispensable when repairing damage to corrosion-resistant paint systems and in the conservation or, for example, welding joints after construction.
SKU: LD3027 - Pictorial Surface Standards
Tank Coatings Condition Guide – LD3075
A guide to assist ship’s staff in the assessment of tank, hold and space coatings of existing ships for the purpose of determining compliance with the Rules and Regulations for the Classification of Ships. The guide handles the definition of the tank coating condition in Good / Fair / Poor classification. It also contains the IACS methodology to divide tanks into a number of smaller “areas under consideration” which can easily be identified. Further are included schematics to help defining area determination, percentage of coatings breakdown for specific ship structures and a comparison of common rust scales. A series of full color pictures of tank coatings in various conditions and a section that describes and shows the hotspots for corrosion and other common defects is also part of the guide.
The last section contains sketched indicating common nomenclature and terminology applied to typical structure of major ship types.
Year of publication: 2008
Size: 95 x 135 mmSKU: LD3075
